How to Remove Nitrates from Water

DetoxWater Editorial Team•Published November 5, 2026

You can reduce nitrates in drinking water with reverse osmosis, anion exchange, or distillation; total time varies with installation and laboratory testing. A water ph calculator cannot measure nitrates or tell you whether treatment is working. For broader guidance, see drinking water quality.

Where do nitrates in water come from?

Nitrates can enter groundwater when rain or irrigation carries fertilizer, manure, or other nitrogen-containing material through soil. Leaking septic systems and wastewater can also contribute. Private wells near agricultural land or septic systems may be vulnerable, although location alone cannot tell you whether a well is affected.

Nitrates can also occur in public water supplies. Public water systems are regulated and monitored, while owners of private wells are responsible for arranging their own testing and treatment.

You generally cannot see, smell, or taste nitrates in water. Clear water is not proof that it is safe; a laboratory test is the way to find out how much nitrate it contains.

How does the body handle nitrates?

After you consume nitrates, your body absorbs them, and much of the nitrate is eventually excreted in urine. Some nitrate can be converted to nitrite, including by bacteria in the mouth and digestive tract.

Nitrite can interfere with hemoglobin’s ability to carry oxygen. Infants, particularly those under 6 months old, are especially vulnerable to this effect, known as methemoglobinemia. Water containing too much nitrate is a particular concern when it is used to prepare infant formula.

The liver and kidneys do most of the body’s detoxification, while the lungs and gut help eliminate waste. There is no need to try to “flush” nitrates with a special drink; the important step is to stop using water that exceeds the recommended limit.

How do you remove nitrates from water step by step?

  1. Use verified safe water first. If a test shows nitrate above 10 mg/L as nitrogen, stop using that water for drinking, cooking, and preparing infant formula. Use a verified safe alternative, such as appropriately labeled bottled water, while you arrange treatment. Follow formula preparation directions rather than changing the amount of water or powder.

  2. Test the source water. Ask a certified drinking-water laboratory or your local health department how to collect a nitrate sample. If you use a public supply, check its water-quality report or ask the utility for a current nitrate result. A laboratory result from your own well is particularly important because nearby wells can differ.

  3. Compare the result with the right limit. The U.S. EPA maximum contaminant level for public water systems is 10 mg/L as nitrogen. Use the same threshold when assessing a private well, even though the federal public-water limit does not directly regulate individual private wells. Check how the laboratory expresses its result before comparing numbers.

  4. Choose a system certified for nitrate reduction. Reverse osmosis, nitrate-selective anion exchange, and distillation can reduce nitrates when properly designed and maintained. Look for an independent certification that specifically includes nitrate reduction for the exact model. A general certification for taste or another contaminant is not enough.

  5. Match the system to your water. Give the supplier your laboratory results and ask whether the system can handle your nitrate level and other water characteristics. An under-sink system can treat water at one tap; make sure everyone uses that treated tap for drinking and food preparation. Ask about installation, replacement parts, maintenance, and disposal of any waste water or spent treatment material.

  6. Install and maintain the equipment. Follow the manufacturer’s instructions or use a qualified installer. Reverse-osmosis membranes and filters need maintenance, and anion-exchange media need regeneration or replacement as directed. A neglected or exhausted system may no longer reduce nitrates adequately.

  7. Test the treated water. Have a laboratory measure nitrate at the treated tap after the system is installed, using its sampling instructions. Keep using the verified safe alternative until the result confirms that the treated water is at or below the limit. Retest according to the manufacturer’s and local health department’s advice.

Do not boil water to remove nitrates. Boiling can concentrate them as water evaporates. Ordinary sediment filters, standard activated-carbon filters, ultraviolet treatment, and conventional water softeners should not be assumed to remove nitrates; use a system with a specific nitrate-reduction claim.

Can foods or binders remove nitrates?

No food, supplement, or oral binder is an established substitute for safe drinking water. Do not rely on vitamin C, activated charcoal, or a detox product to counteract nitrate exposure or make contaminated water safe to drink.

Anion-exchange systems use specially selected material to remove nitrate from water before you drink it. That is different from taking a binder by mouth, and the treatment material itself still needs proper maintenance.

Nitrates also occur naturally in foods, including vegetables. A high nitrate result in drinking water is not a reason to stop eating vegetables; address the water source and discuss individual dietary concerns with a clinician.

How should you test water for nitrates?

Contact a certified drinking-water laboratory or local health department for a sample kit and instructions. Use the supplied container, collect the sample exactly as directed, and return it within the laboratory’s specified timeframe. If you are checking a treatment system, ask how to collect samples both before and after treatment.

Pay close attention to the reporting units. A result expressed as nitrate is not numerically interchangeable with one expressed as nitrogen. If the report is unclear, ask the laboratory to explain or convert the result before comparing it with the EPA limit of 10 mg/L as nitrogen.

One result describes the water at the time it was sampled. Conditions can change, so ask the health department how often to retest your well and whether events such as flooding or changes in nearby land use warrant another test. For treated water, keep records of results and maintenance so you can spot a loss of performance.

Who should be careful, and when should you see a doctor?

Infants are especially susceptible to the effects of nitrate-contaminated water. Pregnant people and anyone caring for an infant should be particularly cautious about an uncertain water source and contact a healthcare professional or local health department for advice. If a baby has consumed formula made with water known to exceed the nitrate limit, contact the baby’s clinician promptly, even if the baby appears well.

Blue or gray skin or lips, difficulty breathing, or marked unusual drowsiness can signal an emergency. Call emergency services immediately if these signs occur, particularly in an infant; do not wait for a water test or home treatment to work.

Stop using water above the nitrate limit for drinking, cooking, or formula, and do not resume until treatment has been verified by testing. If you are unsure how to interpret a result or whether an exposure needs medical attention, contact the laboratory, health department, or a healthcare professional.

More on How To Remove Nitrates From Water

Try the free tool

Water Ph Calculator →

Frequently asked questions

Does freezing water remove nitrates?

Freezing is not a reliable household method for removing nitrates. Use a system specifically certified for nitrate reduction and verify its performance with a laboratory test.

Does leaving water out overnight remove nitrates?

No. Letting water stand does not reliably remove dissolved nitrates.

Can a renter use a nitrate-removal system?

Some point-of-use systems may be suitable for a rental, but installation requirements vary. Check with the property owner and choose a model specifically certified for nitrate reduction.