Does a Brita Filter Remove Nitrates?

DetoxWater Editorial Team•Published November 5, 2026

No, a standard Brita pitcher filter does not reliably remove nitrates because its activated carbon does not effectively capture dissolved nitrate ions. If nitrates are a concern in your water, see how to remove nitrates from water and choose a treatment with a verified nitrate-reduction claim.

Is a Brita filter suitable for water containing nitrates?

A standard Brita pitcher or dispenser filter should not be relied on to make nitrate-contaminated water safe. Improving the taste or appearance of water does not show that nitrates have been removed: nitrates cannot be reliably detected by taste, smell or sight.

The answer applies to standard pitcher filters, not necessarily every product sold under the Brita name. Check the exact device and replacement cartridge for an independently certified claim that specifically names nitrates. A general claim that a filter reduces contaminants is not enough.

If a laboratory finds nitrates above the applicable drinking-water limit, use a verified safe water source for drinking, cooking and preparing infant formula until an appropriate treatment system has been installed and its output tested.

Why doesn't a standard Brita filter remove nitrates?

Nitrates dissolve in water as charged particles called ions. Activated carbon is useful for reducing certain substances, such as those responsible for chlorine taste and odor, but it does not reliably capture dissolved nitrate ions.

Some filters also contain ion-exchange media designed to reduce other contaminants. That does not mean the media will remove nitrates: an ion-exchange system must be designed and verified for nitrate reduction. Learn more about what does a Brita filter remove, keeping in mind that claims differ by filter model.

A nitrate-specific treatment works differently. Reverse osmosis uses a membrane to reduce dissolved contaminants, while nitrate-selective ion exchange swaps nitrate ions for other ions. Distillation collects condensed water separately, leaving nitrates behind. Each method needs proper equipment and maintenance to work as intended.

What percentage of nitrates does a Brita filter remove?

There is no reliable nitrate-removal percentage to assume for a standard Brita pitcher filter. Without independently verified nitrate-reduction data for the exact cartridge, a percentage from another filter or treatment method does not establish how much that cartridge removes. Do not assume either a particular reduction or that the filtered water meets a drinking-water standard.

The useful measurement is the concentration in the treated water, not just a percentage reduction. The U.S. Environmental Protection Agency's maximum contaminant level for nitrates in public drinking water is 10 mg/L as nitrogen. A large percentage reduction would not necessarily bring highly contaminated source water below that limit.

Check how your laboratory reports the result before comparing it with the limit. A result reported as nitrate is not the same numerical measurement as a result reported as nitrate as nitrogen. Ask the laboratory to interpret or convert the result if the units or reporting basis are unclear.

What should you use instead of a Brita filter?

Choose a system independently certified for nitrate reduction, and check that the claim applies to the complete device and replacement components you plan to use. Certification to a general filter standard alone does not mean a device is certified for every contaminant.

OptionHow it addresses nitratesWhat to check
Reverse osmosisA membrane reduces dissolved nitrates.Look for a nitrate-specific certified claim and maintain the membrane and other components.
Nitrate-selective ion exchangeSuitable resin exchanges nitrate ions for other ions.Confirm the nitrate-reduction claim and follow the service schedule.
DistillationWater is vaporized and condensed separately, leaving nitrates behind.Choose equipment with a verified nitrate-reduction claim and follow cleaning instructions.

Have a certified drinking-water laboratory test the source water and, after installation, the treated water. Retest periodically, particularly after service or a change in the source water, and follow the treatment manufacturer's monitoring instructions. Private well owners are responsible for arranging their own water testing.

Do not rely on boiling water to remove nitrates. Boiling can concentrate nitrates as water evaporates; distillation is different because it collects the condensed vapor in a separate container. A tested safe water source is a practical alternative while you arrange treatment.

Infants younger than 6 months are especially vulnerable to the effects of high nitrates. Use verified safe water for formula, and contact a child's clinician if you are concerned about exposure. If an infant has blue or gray lips or skin, or has difficulty breathing, seek emergency care immediately. Pregnant people concerned about exposure should also contact their healthcare professional.

Frequently asked questions

Does letting water sit remove nitrates?

No. Nitrates are dissolved in the water and will not reliably disappear by letting it sit.

Can a TDS meter tell me how much nitrate is in my water?

No. A total dissolved solids meter does not identify nitrates specifically. A laboratory nitrate test can measure their concentration.

Are nitrates and nitrites the same thing?

No. They are different nitrogen-containing substances. Ask the laboratory which measurements are included in your water test.