Does Boiling Water Remove Nitrates?

DetoxWater Editorial Team•Published November 5, 2026

No, ordinary boiling does not remove dissolved nitrates because water evaporates while the nitrates remain behind, potentially becoming more concentrated.

What is the short answer?

Boiling is not a reliable way to make water with high nitrates safe to drink. It removes some water as vapor, not the nitrates dissolved in the water left in the pot.

If a test shows high nitrates, use a safe alternative source while you arrange treatment. For a broader guide to treatment and testing, see how to remove nitrates from water.

Nitrates cannot be reliably detected by taste, smell or appearance. A laboratory test or a report from your water supplier is needed to find out whether they are present at a concerning level.

How does boiling affect nitrates in water?

As water boils, some of it becomes steam and leaves the pot. Dissolved nitrates do not simply evaporate with that steam, so they remain in the water. With less water to dilute them, the amount of nitrates per unit of water can rise.

Cooling the boiled water afterward does not reverse this process. The nitrates remain dissolved, and the water does not regain the volume lost as steam. Even if the starting water is below the drinking-water limit, substantial evaporation can increase its nitrate concentration.

This is different from distillation, which collects water vapor and condenses it into a separate container. Properly operated distillation equipment can reduce nitrates in the collected water; merely boiling water in a pot and using what remains cannot. For the distinction between contaminants, see what boiling water removes.

How much nitrates does boiling remove?

There is no reliable nitrate-removal percentage for ordinary boiling. In a simple model, 0% of the nitrates leaves with the water vapor: the nitrate mass stays in the pot while the water volume falls. That is a theoretical explanation, not a measured result from a particular boiling test.

For example, if water starts at 5 mg/L as nitrogen and half the water evaporates without nitrate loss, the remaining water would contain about 10 mg/L as nitrogen. This is an illustration of concentration, not a prediction for a specific pot or test result.

Some liquid could leave through splashing or droplets, taking dissolved nitrates with it. That is loss of water, not a controlled or dependable treatment method. Boiling for longer does not provide a useful nitrate-removal target.

The U.S. Environmental Protection Agency's maximum contaminant level for nitrates in regulated public drinking water is 10 mg/L as nitrogen. Check the units on a laboratory report: a result reported as nitrate itself is not directly comparable to a limit expressed as nitrogen. Ask the laboratory or local health department to interpret an unfamiliar result.

For a private well, a laboratory result tells you about the sample collected, not necessarily every future use of the well. Ask a qualified laboratory or local health department when to test again, particularly if you have concerns about a nearby source of contamination.

What should you use instead of boiling?

Use bottled water or another source confirmed to be low in nitrates for drinking while you investigate the problem. Use the safe source for cooking and making ice as well; heating contaminated water does not remove its nitrates.

OptionHow it addresses nitratesWhat to check
Reverse osmosisA membrane reduces dissolved nitrates in the treated water.Choose a system certified for nitrate reduction and maintain it as directed.
Nitrate-selective ion exchangeTreatment media exchange nitrate ions for other ions.Check that the equipment is intended for nitrates and service the media as directed.
DistillationWater is evaporated and collected as condensate, leaving nitrates behind.Use equipment designed to collect the condensate and follow its maintenance instructions.
Confirmed safe alternative waterAvoids using the affected water for drinking.Check the source's nitrate test information, especially for infant formula.

Do not assume that a standard carbon pitcher or refrigerator filter removes nitrates. Check the specific product's certification and nitrate-reduction claim; certification for another contaminant does not establish that it works for nitrates.

After installing treatment, have the treated water tested for nitrates and follow the manufacturer's replacement and maintenance schedule. Treatment performance can decline if a membrane or treatment media is not maintained. If you use a private well, contact a qualified laboratory or local health department about testing both the source and treated water.

Infants under 6 months are especially vulnerable to the effects of high nitrates. Do not prepare infant formula with water that exceeds the nitrate limit, even if it has been boiled; ask a pediatrician or local health department about a safe water source. Blue or gray skin or lips, or difficulty breathing, are emergency signs: seek emergency medical care immediately.

If there is also a boil-water advisory for germs, follow the local health authority's instructions using a water source that is safe for nitrates. Boiling can address some microbial hazards, but it does not solve a nitrate problem.

Frequently asked questions

Does letting boiled water cool remove nitrates?

No. Cooling does not remove dissolved nitrates or restore the water lost as steam.

Can freezing water remove nitrates?

Freezing water at home is not a dependable nitrate treatment. Use a confirmed safe water source or a treatment system designed for nitrate reduction.

Does boiling water with a lid remove nitrates?

No. A lid does not separate nitrates from the water you drink, even if some steam condenses back into the pot.