What Does Boiling Water Remove?

DetoxWater Editorial Team•Published November 5, 2026

Boiling inactivates disease-causing bacteria, viruses and protozoan parasites in water, although it does not physically remove them. It is a reliable way to make water safer when germs are the concern, but it is not a general solution for every drinking water quality problem. Metals, salts and many other chemicals can remain in the water after it boils.

Which 3 types of germs does boiling inactivate?

1. Disease-causing bacteria

Heat damages the structures and functions that bacteria need to survive. Boiling therefore inactivates many bacteria that can cause illness through drinking water, including disease-causing strains of E. coli.

To use boiling against bacteria, bring the water to a rolling boil and maintain it for the recommended time. Let it cool and keep it covered in a clean container so it does not pick up germs again. If the water is cloudy, filter out the particles before boiling; cloudiness can make disinfection less reliable.

Strength of evidence: Boiling is a well-established public-health measure for inactivating disease-causing bacteria in drinking water. It should not be described as sterilization: boiling water for drinking does not guarantee that every heat-resistant bacterial spore has been destroyed.

2. Disease-causing viruses

Heat inactivates viruses by damaging the material and structures they need to infect cells. Viruses are too small to be reliably removed by a cloth or ordinary coffee filter, but properly boiling water addresses them through heat rather than straining.

Use the same rolling-boil method for water that may contain viruses. Boil before using the water for drinking, making ice or brushing teeth when a boil-water advisory applies. A clear appearance does not show whether viruses are present.

Strength of evidence: Boiling is a well-established public-health recommendation for inactivating disease-causing viruses in drinking water. Its effectiveness depends on the water reaching a rolling boil for the recommended time and being protected from recontamination afterward.

3. Protozoan parasites

Protozoan parasites such as Giardia and Cryptosporidium can occur in water in protective forms called cysts or oocysts. Boiling inactivates them through heat; it does not need to physically strain the cysts or oocysts out of the water.

If a water source may contain these parasites, bring the water to a rolling boil for the appropriate time. Strain cloudy water first and store the cooled water in a clean, covered container. Do not assume that a filter removes parasites unless it is certified for the specific contaminant.

Strength of evidence: Boiling is a well-established public-health measure for inactivating these parasites in drinking water. A visual check or a taste test cannot confirm that the water is free of them.

What does boiling not reliably remove?

Boiling is mainly a germ-inactivation method. It is not a dependable way to remove dissolved contaminants, and water lost as steam can leave some contaminants more concentrated in the remaining water.

Substance or problemWhat boiling does
Lead, arsenic and other metalsDoes not reliably remove them; concentrations may rise as water evaporates.
NitrateDoes not remove it and may concentrate it.
Fluoride and dissolved saltsDoes not reliably remove them.
PFAS and other chemical contaminantsDoes not reliably remove them; do not treat boiling as a chemical cleanup method.
Free chlorineCan drive off some of it, but the amount removed is unpredictable.
ChloramineIs more persistent than free chlorine; boiling is not a reliable removal method.
Dirt and sedimentDoes not strain particles out; filtering or letting them settle can reduce cloudiness before boiling.

Some hardness minerals can form deposits when water is heated, but boiling is not a dependable way to remove all dissolved minerals. A white residue in a kettle does not show that the water is free of contaminants.

Likewise, a change in taste or smell is not proof that water is safe. Water can look and taste normal while containing germs or chemicals, and an unpleasant taste alone does not identify the cause.

How should you boil water for drinking?

Use these steps when an advisory calls for boiling water, or when germs may be present and no chemical contamination is suspected:

  1. Clear cloudy water by letting particles settle or passing it through a clean cloth, paper towel or coffee filter. These materials reduce visible particles; they do not reliably remove germs or chemicals.
  2. Heat the clearer water in a clean pot until it reaches a rolling boil, with vigorous bubbles throughout the water.
  3. Maintain the rolling boil for 1 minute. At elevations above 6,500 feet, or about 1,980 meters, maintain it for 3 minutes.
  4. Cool the water naturally, taking care to avoid burns from the pot, water and steam.
  5. Store the cooled water in a clean, covered container. Pour it out rather than dipping hands or unclean utensils into it.

The time starts when the water reaches a rolling boil, not when the pot is put on the heat. Keeping the water at a rolling boil much longer is not necessary for the usual drinking-water recommendation and causes more water to evaporate.

If local officials issue instructions that differ for a particular emergency, follow their notice. They may have information about the source and the type of contamination that a general boiling instruction cannot address.

When should you use another water source?

Do not rely on boiling if officials warn that water contains fuel, solvents or other chemicals, or if they issue a do-not-use notice. Boiling cannot be assumed to make chemically contaminated water safe, and heating some volatile chemicals may release vapors. Use bottled water or another source identified as safe by local authorities.

The same caution applies after a flood or chemical spill: water may have both microbial and chemical contamination. Boiling can address susceptible germs but does not solve the chemical part of the problem. If a private well may have been affected, seek local health-department guidance about testing and a safe temporary water supply.

A household treatment device may remove a particular chemical, but performance depends on the device and its certification. Check that it is certified for the contaminant of concern and maintain it as directed; a filter that improves taste is not necessarily designed to remove lead, nitrate or pathogens.

How can you keep boiled water safe afterward?

Use a clean container with a tight-fitting cover, and keep its opening and any pouring surface clean. Boiling will not protect the water if contaminated hands, utensils or an unclean storage container introduce germs after it cools.

During a boil-water advisory, use safe water for drinking and for activities where water can enter the mouth, such as brushing teeth and making ice. Follow the specific local notice for other uses. For infant formula, follow the product instructions and health-authority guidance as well as the water advisory; ask a clinician if you are unsure how to prepare it safely.

If someone develops severe symptoms after drinking suspect water, or an infant or medically vulnerable person becomes ill, contact a healthcare professional. Boiling can reduce microbial risk before water is consumed, but it cannot diagnose or treat an illness.

Frequently asked questions

Does boiling make salt water drinkable?

No. Ordinary boiling leaves dissolved salt in the water remaining in the pot and can make it more concentrated as water evaporates.

Can an electric kettle be used to boil drinking water?

It can heat the water to a boil, but an automatic kettle may switch off before the recommended rolling-boil time has elapsed. If it cannot maintain a rolling boil for the required time, use a suitable pot instead.

Does boiling remove microplastics?

Boiling is not a reliable method for removing microplastics from drinking water. Do not assume that boiling or visible mineral deposits have removed them.