Is There Fluoride in Wyoming Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents, because 55.6% of people on community water systems received fluoridated water in 2020. That figure does not cover every Wyoming resident or establish the status of a particular city or utility. For local comparisons, see fluoride in tap water by city.

How much of Wyoming’s water is fluoridated?

In 2020, 55.6% of people served by Wyoming community water systems received fluoridated water, according to the CDC’s state and county fluoridation dataset. The percentage describes people served, not the percentage of water systems or the share of all Wyoming residents.

It is a statewide snapshot, not a measurement of the fluoride concentration at a particular tap. It also does not tell you whether your own utility adds fluoride or whether your water contains naturally occurring fluoride.

Natural fluoride and fluoridation are not the same thing. Fluoride can occur naturally in a water source; finding it in a sample does not, by itself, show that a utility added it.

What is Wyoming’s law or policy on fluoridation?

The available statewide data do not establish Wyoming’s current fluoridation policy. The 2020 percentage alone cannot tell you whether a law requires, prohibits or otherwise governs fluoridation in a particular community.

For a current policy answer, contact Wyoming’s drinking water program or ask your local utility. Be specific about whether you want to know about a statewide rule, a local decision or the utility’s present practice: those are separate questions.

How can you find out about your own city or utility?

Start by identifying the water system that serves your address. Its name may appear on your water bill; a landlord or property manager may also be able to identify it. A city name alone is not always enough to identify the system serving a particular property.

Ask the utility for its latest consumer confidence report, also called an annual drinking water quality report. Look for fluoride in the reported results and note the concentration in milligrams per liter (mg/L), the sampling year and whether the report gives a single result or a range. A report describes the system’s sampled water, not necessarily a sample taken from your own tap.

You can also ask the utility these questions:

  • Does the system add fluoride, or is the fluoride reported in the water naturally occurring?
  • What fluoride concentration was most recently reported, and when and where was the sample collected?
  • Does the published result describe the water supplied to my address?
  • Has the utility’s fluoridation practice changed since the reported sample was taken?

If you use a private well, a community utility’s report may not describe your water. Ask a qualified laboratory about testing your well for fluoride, and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach a water test.

If you are considering a filter, our guide to the best pitcher water filters can help you compare options. Check the documentation and independent certification for the specific filter model: a general filtration claim does not establish that a filter removes fluoride.

What do the fluoride levels mean?

The following national values serve different purposes. None is a measured fluoride concentration for Wyoming or for your water system.

ValueMeaning
0.7 mg/LThe U.S. Public Health Service recommended concentration for community water fluoridation.
2.0 mg/LThe EPA’s secondary drinking water standard for fluoride, which is not federally enforceable.
4.0 mg/LThe EPA’s federally enforceable maximum contaminant level for fluoride in public drinking water.

The 0.7 mg/L recommendation concerns community water fluoridation; it is not evidence that a particular supply has that concentration. The EPA standards are separate benchmarks, so check the number and units in your utility report before comparing a reported result with them.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor for advice about your circumstances.

Where does the Wyoming data come from?

The statewide percentage comes from the CDC Water Fluoridation Reporting System dataset linked above. Its figure is for 2020 and is based on the population served by community water systems receiving fluoridated water; it is not a current test result from an individual home.

The national reference values come from the U.S. Public Health Service recommendation and EPA drinking water standards. To learn about a particular address, use the statewide figure as background and obtain a current utility report or a test of the water you use.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride from water.

Can you tell whether water contains fluoride by looking at it?

No. You cannot reliably determine whether water contains fluoride, or its concentration, by looking at it.