How to Test Water Quality at Home
You can screen drinking water at home with a strip kit in the total time specified by its instructions—for example, 15–30 minutes if that is the kit’s stated total. Some strips produce results sooner; bacteria tests and laboratory analyses generally take longer.
What does testing drinking water at home involve?
Testing means collecting a sample and checking it for selected contaminants or properties. An at-home kit can provide a useful screen, but no single kit checks for everything that affects drinking water quality.
A laboratory certified for the specific contaminant can provide a more reliable result, especially for concerns such as lead, arsenic, nitrate or bacteria. The right tests depend on whether your drinking water comes from a public system or a private well, your plumbing and local conditions.
How do you test drinking water at home?
-
Identify your water source and concerns. Find out whether your drinking water comes from a public supplier or a private well. Consider whether you are investigating a change in taste or appearance, old plumbing, flooding, a nearby contamination source or a routine well check.
-
Choose tests that match those concerns. Look for a drinking water kit that names the substances it measures and provides a clear range and instructions. A pH strip or total dissolved solids meter does not test for every harmful contaminant; use a certified laboratory for specific concerns that the kit cannot measure reliably.
-
Check your supplier’s report or ask a local expert. If you use a public system, review its annual water quality report or contact the supplier to learn what it tests and whether there are local concerns. If you use a private well, ask your local health department or a certified laboratory which additional tests are appropriate for your area.
-
Prepare the sample as directed. Read the kit or laboratory instructions before turning on the tap, and use the supplied or specified container. Sampling requirements differ: a lead test may require water that has stood in the plumbing, while another test may require running the tap first.
-
Collect and label the sample. Follow the instructions for the sampling location, container, handling and any required preparation of the tap. Record the collection time and location if requested, and send a laboratory sample back within the laboratory’s stated time and temperature requirements. Ask the laboratory about delivery arrangements before collecting if you are unsure you can meet them.
-
Run the kit or submit the sample. For a strip test, follow the instructions for dipping, timing and comparing the color with the chart. For a bacteria kit, follow its incubation and reading instructions; do not assume its total turnaround time is the same as a strip test.
-
Compare the result with the appropriate guidance. Check the units and identify exactly what was measured before comparing a result with a standard. If a result is unclear, outside the kit’s range or inconsistent with the instructions, contact the manufacturer or laboratory rather than guessing. A result below a test’s reporting limit does not necessarily mean that none of the substance is present.
-
Act on the result and retest when advised. Contact your water supplier, local health department or laboratory about a concerning result and ask whether a confirmatory test is needed. If a repair or treatment device is installed, follow their advice about when and where to collect a follow-up sample.
The following examples show why the name and units on a report matter. Some benchmarks concern health, while others are intended mainly to address taste, appearance or other non-health effects.
| Result | What to know |
|---|---|
| Nitrate | The U.S. EPA maximum contaminant level is 10 mg/L as nitrogen. Check whether your report uses that same measurement before comparing it. |
| Arsenic | The U.S. EPA maximum contaminant level is 0.010 mg/L, or 10 ppb. A laboratory test is appropriate when arsenic is a concern. |
| Lead | An EPA action level is used for public-system compliance; it is not a guarantee that an individual tap result below it is risk-free. EPA’s health goal for lead is zero. |
| pH | The U.S. EPA secondary range is 6.5–8.5 pH units. It is an indicator of water properties, not proof that drinking water is free of contaminants. |
| Total dissolved solids | The U.S. EPA secondary standard is 500 mg/L. A meter estimates dissolved material but cannot identify which substances are present. |
| Bacteria | A positive home screen needs prompt follow-up with the health department or laboratory. The response depends on which bacteria were detected and the circumstances. |
A public supplier’s report describes its system, but it may not reflect conditions at your particular tap. Household plumbing can affect a sample, so ask a laboratory how to collect one if you are concerned about lead.
How often should you test drinking water?
For a private well, test at least once a year for total coliform bacteria and nitrate. Ask your local health department whether local geology, land use or previous results make other tests appropriate.
Test or seek advice sooner after flooding, work on the well or plumbing, a nearby contamination incident, or a change in the drinking water’s color, smell or taste. After a flood, do not assume a private well is safe; follow local health department instructions before using it.
For a public supply, review the supplier’s annual report and notices. Arrange a tap test when you have a specific household concern, such as possible lead from plumbing, even if the system’s report does not show a problem.
What are the benefits of testing drinking water?
Testing can help you choose a response based on a measured concern rather than taste or appearance alone. It can also give a laboratory, water supplier or health department useful information when you ask for help.
A targeted follow-up test can show whether a repair or treatment device is working at the sampled location. Results describe the sample collected at that time, however; they do not guarantee that every contaminant was checked or that conditions will never change.
Who should be careful, and when should you stop using drinking water?
Infants, pregnant people and people with weakened immune systems may be especially vulnerable to certain contaminants. If drinking water used to prepare infant formula may contain nitrate, lead or another contaminant, use bottled water or another verified safe source and contact a health professional or local health department for advice.
If bacteria are detected or microbial contamination is suspected, stop using the drinking water untreated. Use bottled water or bring the water to a rolling boil for 1 minute before drinking, cooking, brushing teeth or preparing formula; above 6,500 feet (about 2,000 meters), boil it for 3 minutes. Follow any different instructions from local authorities.
Boiling does not remove lead, nitrate or other chemical contaminants and can concentrate some of them. If chemical contamination is known or suspected, stop using the drinking water for drinking or cooking, use a verified safe source, and contact your supplier or health department; do not rely on boiling.
Seek medical care promptly for severe symptoms such as bloody diarrhea or signs of dehydration after possible exposure. Stop the test if the instructions cannot be followed or the result is unreadable, and ask a certified laboratory or health department how to proceed rather than treating an uncertain result as safe.
Frequently asked questions
Can a standard home kit test drinking water for microplastics?
Most standard home drinking water kits do not measure microplastics. A kit that tests pH, hardness or dissolved solids cannot tell you whether microplastics are present.
Can I use a pool test kit for drinking water?
A pool kit is designed for pool water and should not be treated as a general drinking water safety test. Choose a kit intended for drinking water and the specific property you want to check.
Does a refrigerator filter make water testing unnecessary?
Not necessarily. Filters differ in what they are certified to reduce, and a filter does not test the water. Check its certification and replacement instructions against the contaminant you are concerned about.