Is There Fluoride in Wisconsin Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 86.7% of people on Wisconsin community water systems received fluoridated water in 2020. The statewide figure does not establish the fluoride concentration at a particular address; see also fluoride in tap water by city.

How much of Wisconsin’s water is fluoridated?

In 2020, 86.7% of Wisconsin’s population served by community water systems received fluoridated water. This is a population-based percentage, not the percentage of water systems that added fluoride or a measurement of fluoride in a sample.

The figure covers people served by community water systems, not every Wisconsin resident. It does not tell you whether a particular city or utility fluoridates its water, and it does not describe the water from an individual private well.

Fluoride can also occur naturally in water. Its natural presence alone does not establish that a utility adds fluoride or that the water has been fluoridated by the utility.

What is Wisconsin’s law or policy on fluoridation?

The statewide percentage does not establish whether Wisconsin law requires, permits or prohibits a particular water system from adding fluoride. Nor does it identify the policy of any individual Wisconsin community or utility.

To check the current state rules, consult Wisconsin statutes or ask the Wisconsin Department of Natural Resources. For a local policy, ask the water utility or local government responsible for the supply serving your address.

Distinguish the question of whether fluoride is present from whether a utility adds it. A water system may report a fluoride concentration without that number alone explaining whether the fluoride is naturally occurring or added.

How can you find out about your city or utility?

Start by identifying the water system that serves your address. Your water bill may name the utility; if you rent or do not receive the bill, ask the property manager or local utility. A city name alone may not identify the correct supplier.

Look for the utility’s latest annual drinking water quality report, often called a Consumer Confidence Report. Find the entry for fluoride and check the reported concentration, the sampling date and whether the number is an average or a range. The report describes the sampling included in it, rather than a separate measurement at every tap.

If the report is unclear, ask the utility whether it adds fluoride, what fluoride concentration it has reported and when that sample was collected. Ask for the report covering your address if the utility operates more than one water system.

If your water comes from a private well, the community-water percentage does not tell you its fluoride concentration. A laboratory test of water from that well can provide a result; our guide to how to test water quality at home explains how to approach testing.

If you are considering filtration, the best pitcher water filters are a starting point. Check the specific model for an independently certified fluoride-reduction claim; a general filtration claim does not establish that it removes fluoride.

What do the fluoride levels and standards mean?

A fluoride concentration is commonly reported in milligrams per liter (mg/L). The following numbers are standards or recommendations, not measured Wisconsin levels:

LevelWhat it represents
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation; it is a recommendation, not an EPA maximum.
2.0 mg/LEPA’s secondary standard for fluoride; secondary standards are not federally enforceable.
4.0 mg/LEPA’s federally enforceable maximum contaminant level for fluoride in public water systems.

Compare a local report or laboratory result with the relevant number, keeping the sampling date and type of result in view. The statewide percentage cannot tell you which of these values, if any, applies to your water.

Who should ask for advice?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Wisconsin data come from?

The statewide percentage comes from the CDC’s Community Water Fluoridation State and County Level data, which uses the Water Fluoridation Reporting System. The Wisconsin figure is for 2020 and describes the share of the community-water-system population receiving fluoridated water.

That source is useful for a statewide view, but the percentage is not a fluoride concentration. For an address-specific answer, use the report for the correct water system or a test result for the well, and check when the water was sampled.

Frequently asked questions

Is naturally occurring fluoride the same as fluoridation?

No. Fluoride can occur naturally in water without a utility adding it.

Can I tell whether water contains fluoride by looking at it?

No. Check a water quality report or a laboratory test result rather than relying on the water’s appearance.

Does a utility report measure the water at every tap?

No. It reports the results of the system’s sampling, not a separate measurement at every tap.