Is There Fluoride in Wilmington Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride; its state-reported mean of 10 monthly values was about 0.43 mg/L in 2024.

That figure is for the Sweeney water system, not necessarily every water supply serving Wilmington. For comparisons with other locations, see fluoride in tap water by city.

Does Wilmington add fluoride to its water?

The Cape Fear Public Utility Authority’s Sweeney system, identified as NC0465010, was listed as fluoridated with an “Adjusted” status in the 2025 CDC report. The classification indicates added fluoride, rather than a system relying only on fluoride that occurs naturally in its source water.

The report identifies a specific public water system. If you live in or near Wilmington, check your water bill or ask your provider whether Sweeney supplies your address. A private well is not covered by the Sweeney system’s reported level.

How much fluoride is in Wilmington water?

The following figures compare the Sweeney system’s reported measurements with national reference levels. All concentrations are in milligrams per liter (mg/L).

Measure or standardFluoride level
Sweeney: mean of 10 reported monthly values in 20240.43 mg/L
Sweeney: lowest reported monthly value in 20240.05 mg/L
Sweeney: highest reported monthly value in 20240.73 mg/L
U.S. Public Health Service recommended level for community water fluoridation0.7 mg/L
EPA secondary standard2.0 mg/L
EPA maximum contaminant level4.0 mg/L

The 2024 mean of the 10 reported monthly values was below the 0.7 mg/L recommendation and both EPA standards. The recommendation is a target for community water fluoridation; the secondary standard is not federally enforceable, while the maximum contaminant level is an enforceable limit.

The 2024 mean is not a measurement for every month: 10 monthly values were reported. Three of those values were below 0.2 mg/L, pulling down the mean; it understates the level in months when fluoride was fed. The mean alone also does not establish a regulatory compliance determination.

How do New Hanover County and North Carolina compare?

In 2020, 80.0% of New Hanover County’s public-water-system population received fluoridated water. Across North Carolina, the corresponding figure was 87.9%.

These are percentages of people served by public water systems, not percentages of all residents, homes or water systems. They provide county and state context rather than a measurement from the Sweeney system. They also describe 2020, so they should not be treated as current coverage figures or used to determine what comes out of an individual tap.

What does North Carolina law say about fluoridation?

The available system and coverage reports do not establish North Carolina’s current law or policy on adding fluoride. They do not show whether fluoridation is required, permitted or prohibited for a particular system.

Sweeney’s reported “Adjusted” status describes its fluoridation classification; it does not, by itself, explain the legal reason for that status. For a current policy question, ask the water provider or the relevant state drinking-water authority rather than inferring a statewide requirement from one system’s report.

How can you check your water or remove fluoride?

Start by identifying your water supplier. If you receive a public water bill, use the provider name and service address to ask which system serves you and request its latest fluoride information. Ask whether the figure is a monthly result, an average or another type of measurement, and which period it covers.

For a private well, or if you want a result from your own tap, ask a laboratory about a fluoride test and its sampling instructions. The guide to how to test water quality at home explains how to approach water testing. Keep the result’s units and sampling date so you can compare it accurately with other figures.

If you want to reduce fluoride, look for a treatment product specifically certified to reduce it. Reverse osmosis systems and distillation units are options; check the exact model’s fluoride-reduction claim and follow its maintenance instructions. Do not assume every carbon filter or pitcher removes fluoride. Our guide to the best pitcher water filters can help you compare pitchers, but check each model’s certification for fluoride before buying.

Who should ask about fluoride?

If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the Wilmington data come from?

The CDC fluoridation status report lists the Sweeney system as fluoridated and adjusted for 2025. That historical listing does not establish whether feeding continued without interruption or what the current status is.

The CDC monthly fluoride report is the source for the 2024 Sweeney measurements: the 0.43 mg/L mean is calculated from 10 reported monthly values for the system. Those monthly values ranged from 0.05 mg/L to 0.73 mg/L in 2024.

The CDC county and state fluoridation dataset supplies the 2020 New Hanover County and North Carolina coverage percentages. Its population coverage figures are different from a fluoride concentration measured in mg/L.

Frequently asked questions

Does boiling Wilmington water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Is fluoride measured in mg/L the same as parts per million?

In water, 1 mg/L is approximately equal to 1 part per million, or ppm.