Is There Fluoride in Wichita Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added; Wichita water contains naturally occurring fluoride, with a mean of about 0.29 mg/L in detected finished-water samples from 2012–2019.

Is there fluoride in Wichita water?

Yes. Fluoride is present naturally, even though Wichita does not add it to the water. The CDC’s 2025 fluoridation status report lists WICHITA, CITY OF, water system KS2017308, as not fluoridated.

Natural fluoride and added fluoride are not the same thing. A water system can have a measurable fluoride level without adding fluoride as part of its treatment process. For comparisons with other communities, see fluoride in tap water by city.

The Wichita finding applies to the city water system identified in the CDC report. If your address is served by a different utility or a private well, its fluoride level and fluoridation status may differ.

How much fluoride has been measured in Wichita water?

In the EPA’s 2012–2019 compliance monitoring data, the mean of detected fluoride results for Wichita’s finished water was 0.29 mg/L. The maximum measured result was 0.35 mg/L for the same period.

Measure or standardFluoride level
Mean of detected Wichita finished-water samples, 2012–20190.29 mg/L
Maximum Wichita finished-water sample result, 2012–20190.35 mg/L
US Public Health Service recommended level for community water fluoridation0.7 mg/L
EPA secondary standard2.0 mg/L
EPA maximum contaminant level4.0 mg/L

The EPA data contain eight finished-water samples from 2012–2019, six of which detected fluoride. The 0.29 mg/L mean covers the detected results only; it is not an average that treats the other two results as zero.

The recommended 0.7 mg/L level applies to community water fluoridation; it does not mean Wichita adds fluoride. The EPA’s 2.0 mg/L secondary standard is non-enforceable at the federal level, while 4.0 mg/L is the enforceable maximum contaminant level. These historical Wichita measurements do not establish the level at a particular tap today.

How does Wichita compare with Sedgwick County and Kansas?

In 2020, 3.2% of Sedgwick County’s population served by public water systems received fluoridated water, according to CDC state and county data. The corresponding figure for Kansas was 65.4%.

Those percentages describe people served by public water systems, not necessarily every resident. The Sedgwick County figure covers a broader area than Wichita’s city utility, so it should not be used as the city system’s fluoridation status or as a measurement of fluoride at an individual address.

What is Kansas policy on water fluoridation?

The available information does not establish a Kansas statewide fluoridation requirement or policy. The CDC report identifies Wichita’s system as not fluoridated, but that city-specific status should not be read as a statement about what every Kansas water system does.

For a question about a current state or local policy, contact the relevant water utility or Kansas drinking-water authorities. Ask specifically whether the answer concerns Wichita’s system, another public system or a private supply.

How can you check or remove fluoride from your water?

Start by identifying your water provider on your bill or by asking the property manager. If Wichita’s city system serves your address, look for its latest water-quality report and ask the utility for a recent fluoride result, including the sampling date and whether it represents finished water or a tap sample.

For a result specific to your home, use a laboratory that tests drinking water for fluoride. Follow its sampling instructions and check the report’s units; our guide to how to test water quality at home explains the process. Private-well users should arrange testing for their own supply rather than rely on city results.

Reverse osmosis systems and filters using activated alumina can reduce fluoride when designed for that purpose. Check the exact product’s independent certification or performance information for a fluoride-reduction claim, and follow its maintenance and replacement instructions. Not every pitcher removes fluoride; compare options in our guide to the best pitcher water filters.

Who can you ask about fluoride?

If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the Wichita fluoride data come from?

The city’s no-added-fluoride status comes from the CDC’s 2025 system report linked above. The historical measurements come from the EPA’s Six-Year Review 4 compliance data for the same Wichita system, while the county and state percentages come from the CDC’s 2020 dataset.

These sources answer different questions: the CDC system report describes fluoridation status, the EPA data report measured fluoride in finished-water samples, and the CDC percentages describe coverage across public-water-system populations. Check newer utility information or a current sample if you need a current level.

Frequently asked questions

Does boiling Wichita water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Can you tell whether water contains fluoride just by looking at it?

No. Clear water can contain dissolved fluoride; a fluoride test is needed to measure it.

Is mg/L the same as parts per million for fluoride in water?

For dilute drinking water, 1 mg/L is approximately equal to 1 part per million.