Is There Fluoride in Waco Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Waco’s utility adds fluoride; the measured mean in finished-water compliance samples was 0.77 mg/L during 2012–2019.

Is fluoride added to Waco water?

Waco’s water is fluoridated, meaning the utility adds a fluoride product rather than relying only on fluoride naturally present in the water. The listed product is H2SiF6, also known as fluorosilicic acid. The CDC’s 2025 fluoridation status report identifies CITY OF WACO, public water system TX1550008, as fluoridated.

Natural fluoride and added fluoride are different ways fluoride can be present in water. Waco’s reported status specifically indicates addition by the utility. For comparisons with other locations, see fluoride in tap water by city.

How much fluoride was measured in Waco water?

The EPA’s Six-Year Review 4 compliance data show a mean of 0.77 mg/L for detected fluoride in Waco’s finished-water samples collected during 2012–2019. All 20 samples in that dataset had detectable fluoride; the highest measured result was 1.22 mg/L during the same period.

Finished water is water that has been treated for distribution. The mean summarizes historical compliance samples; it is not a current measurement at a particular Waco tap. The highest result is an individual sample, not the average.

Measure or benchmarkFluoride levelMeaning
Waco mean, 2012–20190.77 mg/LMean of 20 detected finished-water compliance samples
Waco maximum, 2012–20191.22 mg/LHighest result among those samples
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

Both the historical Waco mean and maximum were above the 0.7 mg/L recommendation and below the two EPA benchmarks. The recommendation is not itself the EPA’s enforceable limit. These historical results alone do not establish the fluoride level at your tap today or determine a current compliance status.

How does Waco compare with McLennan County and Texas?

In 2020, 86.5% of the public water system population in McLennan County received fluoridated water. The corresponding figure for Texas was 71.0%, according to the CDC’s state and county fluoridation data.

Those percentages describe people served by public water systems, not necessarily every resident or every water source. The county figure is context for McLennan County as a whole; it is not a separate measurement of fluoride in Waco’s water. The percentages also describe 2020, while the Waco system’s status report is from 2025.

What is Texas law or policy on fluoridation?

The available sources do not establish Texas law or statewide policy on water fluoridation. Waco’s reported status shows that its utility adds fluoride, but it does not, by itself, establish whether fluoridation is required statewide or how decisions are made for other systems.

Likewise, the statewide percentage shows how much of the public water system population received fluoridated water in 2020; it should not be treated as a statement of state law.

How can you check your water or remove fluoride?

First, confirm which public water system serves your address. A Waco address does not by itself establish that the CITY OF WACO system supplies your water; if another utility serves you, ask it for its latest water quality report and fluoride information. A private well is not covered by the Waco utility’s reported samples.

For an address served by Waco, check the latest utility report for the sampling year and the reported fluoride result. To learn the concentration at your own tap, ask a certified laboratory about a fluoride test and follow its collection instructions. Our guide to how to test water quality at home explains how to approach water testing.

If you want to reduce fluoride, choose a treatment device with an independently certified fluoride-reduction claim for the exact model and cartridge. Reverse-osmosis systems can reduce fluoride; look for certification to NSF/ANSI 58 that specifically includes fluoride reduction. Follow the manufacturer’s maintenance and replacement instructions, and consider testing the treated water to check performance.

Do not assume every pitcher or carbon filter removes fluoride. Check the product’s specific certification and compare options in our guide to the best pitcher water filters. Boiling is not a fluoride-removal method: evaporation can concentrate fluoride in the remaining water.

Who should seek advice?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Waco fluoride data come from?

The Waco status comes from the CDC’s 2025 system report, while the concentration figures come from EPA compliance monitoring data for 2012–2019. The county and state percentages come from the CDC’s 2020 public water system population data.

These sources answer different questions: whether Waco was reported as fluoridated, what was measured in historical finished-water samples, and how common fluoridated service was across a wider population. For the most recent local information, check the utility’s latest report or ask it directly.

Frequently asked questions

Is 0.77 mg/L a current measurement at every Waco tap?

No. It is the mean of detected finished-water compliance samples from 2012–2019, not a current result for an individual tap.

Does the McLennan County percentage include every resident?

The 2020 figure describes the public water system population receiving fluoridated water, not necessarily every county resident or water source.

Will any pitcher filter remove fluoride?

No. Check for an independently certified fluoride-reduction claim for the exact pitcher and cartridge.