Is There Fluoride in Virginia Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 95.5% of people on Virginia community water systems received fluoridated water in 2020. That statewide figure does not establish the fluoride level at a particular address. For comparisons with other locations, see fluoride in tap water by city.

How much of Virginia’s water is fluoridated?

According to the CDC’s community water fluoridation data, 95.5% of people served by community water systems in Virginia received fluoridated water in 2020. The figure describes people served by those systems, not the percentage of all water sources or all Virginia residents.

It is also a historical coverage figure, not a measurement of fluoride concentration. It does not tell you how much fluoride was in a particular utility’s water in 2020 or what is in your tap water now. People using private wells are not included in the community-water-system population.

Does Virginia law require water fluoridation?

The coverage figure alone does not establish whether Virginia law requires fluoridation or what rules apply to an individual utility. We do not have a verified statewide policy to report, so the percentage should not be treated as evidence of a mandate.

For a current answer about the rules that apply to your supply, contact Virginia’s drinking water authorities or ask your utility to identify its applicable requirements. Separately, ask the utility whether it adds fluoride: A statewide policy answer and an individual system’s treatment practices are not the same piece of information.

How can you find the fluoride level in your city or utility?

If a community water system supplies your home, start with its latest annual drinking water quality report, also called a Consumer Confidence Report. Your water bill can help you identify the supplier. Look for the report on the utility’s website or request a copy from the utility.

Find the entry for fluoride and check the concentration, units and sampling date. A report may show a single result or a range; if the basis is unclear, ask the utility how the value was calculated and when the water was sampled. If the utility uses more than one water source, ask which source serves your address and whether its fluoride results differ.

Also ask whether the utility adds fluoride or whether the fluoride reported is naturally present. Finding fluoride in a test does not, by itself, establish that the utility adds it. Naturally occurring fluoride is not evidence of fluoridation.

If you use a private well, arrange a fluoride test through a laboratory and follow its sampling instructions. Our guide to how to test water quality at home explains the process of collecting and submitting a sample. A statewide community-system percentage cannot substitute for a result from your well.

If you are considering filtration, check whether a particular product is certified for fluoride reduction rather than assuming every pitcher removes it. Our guide to the best pitcher water filters can help you compare products; check each product’s certification and replacement instructions for its specific capabilities.

What do the fluoride levels and standards mean?

Fluoride results are commonly reported in milligrams per liter, written as mg/L. The following federal figures are reference points, not measured Virginia water levels:

FigureWhat it represents
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation. It is a recommendation, not a federal maximum.
2.0 mg/LThe EPA’s secondary standard for fluoride. Secondary standards are not federally enforceable.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride, an enforceable federal limit for regulated public water systems.

When comparing a report with these figures, check that its result uses the same units and note the sampling date. A recommended level, a secondary standard and an enforceable limit serve different purposes; they are not interchangeable.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does this Virginia data come from?

The statewide coverage figure comes from the CDC’s Water Fluoridation Reporting System dataset, published through data.cdc.gov. Its Virginia figure is for 2020 and describes the share of the community-water-system population receiving fluoridated water. It should not be read as a current result for every address.

We found no statewide measured fluoride concentration to report for Virginia. The federal figures above provide context for reading a concentration, but they do not establish one for your utility. For a local measurement, use a utility report or a laboratory result and keep its sampling date and source with the number.

Frequently asked questions

What does mg/L mean on a fluoride report?

It means milligrams per liter, a unit of concentration. It tells you the mass of fluoride reported for a liter of water.

Does my mailing city identify my water supplier?

Not necessarily. Check your water bill or contact the utility serving your address to confirm the supplier.

Does the 2020 Virginia percentage include private wells?

No. It describes people served by community water systems, not households using private wells.