Is There Fluoride in Vermont Water?
Yes, for most residents: 56.3% of people on Vermont community water systems received fluoridated water in 2020. That figure does not establish whether fluoride is added to your own supply or how much fluoride your water contains. For other locations, see fluoride in tap water by city.
How much of Vermont’s water is fluoridated?
In 2020, 56.3% of people served by Vermont community water systems received fluoridated water. The figure describes people served by those systems, not the percentage of Vermont’s total population or the percentage of water systems that added fluoride.
It is also a snapshot from 2020, not a current determination for every community. It does not give a fluoride concentration in milligrams per liter (mg/L) for the state or for an individual household.
Water can contain naturally occurring fluoride without a utility adding it. Natural fluoride should not be confused with a decision to fluoridate a water supply.
Does Vermont law require water fluoridation?
We could not verify a statewide Vermont policy on whether community water systems must add fluoride. The 2020 population figure alone does not establish a statewide mandate or tell you what policy applies to a particular system.
For a local answer, ask the utility serving your address whether it adds fluoride and where that decision is documented. A city name alone may not identify the system that supplies your home, so have your service address or water bill ready when you contact the utility.
How can you find out about your own water?
Start by identifying your water source. If you receive a water bill, look for the utility’s name; if you rent or share a supply, your landlord or property manager may be able to identify the system. A private well is different from a community water system and is not covered by the 2020 community-system percentage.
For a community supply, ask the utility for its annual drinking water quality report and its latest fluoride results. Check the report’s reporting period and units, then look for fluoride in the list of detected substances. If the report is unclear, ask the utility:
- Does the system add fluoride?
- What fluoride concentration was most recently reported, in mg/L, and when was it measured?
- Is the result an average, a range or a single measurement?
- Does the reported concentration include naturally occurring fluoride as well as any fluoride added?
A concentration and an addition policy answer different questions: a reported fluoride level does not, by itself, prove the utility adds fluoride. Ask for clarification rather than assuming the source of a reported amount.
For a private well, ask a drinking-water testing laboratory whether it can measure fluoride and report the result in mg/L. Follow its sampling instructions and keep the result with the sampling date. Our guide to how to test water quality at home explains the testing process.
If you are considering filtration, see our guide to the best pitcher water filters. Check the specific filter’s certified contaminant-reduction claims: a pitcher filter should not be assumed to reduce fluoride simply because it filters water.
What do fluoride levels and standards mean?
These national numbers are reference points, not measurements of Vermont water:
| Reference | Fluoride level | What it means |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation, not an enforceable maximum |
| EPA secondary standard | 2.0 mg/L | A secondary standard, not a federally enforceable maximum |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable federal limit for regulated public water systems |
Compare a local result with these numbers only after checking its units and date. A utility’s fluoridation policy, the concentration it reports and whether it meets an applicable standard are separate pieces of information.
If you have questions about fluoride in your water, ask a dentist or doctor.
Where does the Vermont data come from?
The 2020 Vermont percentage comes from the CDC’s community water fluoridation state and county data, based on its Water Fluoridation Reporting System. It describes the population served by water systems receiving fluoridated water, rather than a measured statewide fluoride concentration.
Use the CDC figure for the statewide picture at that time. For a current answer about a particular address, the utility’s latest report or a fluoride test of a private well is more relevant; neither can be determined from the statewide percentage alone.
Frequently asked questions
Does the Vermont percentage include private wells?
No. The 2020 figure describes people served by community water systems, not households using private wells.
Does the percentage tell me whether bottled water contains fluoride?
No. The figure concerns people served by community water systems, not the fluoride content of bottled water.
Is 1 mg/L the same as 1 part per million in water?
For dilute drinking-water measurements, 1 mg/L is approximately 1 part per million.