Is There Fluoride in Tucson Water?
Yes, fluoride is present: Tucson’s detected finished-water compliance samples had a mean of 0.27 mg/L in 2013–2019, but whether the utility adds fluoride is not reported.
Does Tucson add fluoride to its water?
The measurements show that fluoride was present in Tucson’s finished water during the sampling period. They do not establish whether the fluoride was naturally occurring, added by the utility, or a combination of both.
Naturally occurring fluoride is not the same as community water fluoridation, which involves adjusting fluoride in a water supply. A fluoride measurement on its own cannot establish that Tucson adds it.
For comparisons with other locations, see fluoride in tap water by city.
How much fluoride was measured in Tucson water?
The EPA compliance dataset includes 354 finished-water samples for the Tucson City Of system from 2013–2019. Fluoride was detected in 344 of those samples. The mean below covers the detected samples, not necessarily every sample collected.
| Measurement or benchmark | Fluoride level | Basis |
|---|---|---|
| Tucson mean | 0.27 mg/L | Mean of detected finished-water compliance samples, 2013–2019 |
| Tucson maximum | 1.17 mg/L | Highest measured result in the finished-water sample set, 2013–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable federal secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
The Tucson mean was below all three benchmarks. The highest measured result was above the recommended level for community water fluoridation but below both EPA standards.
These historical results do not establish the current level at a particular tap. The recommendation and standards also serve different purposes, so a comparison with an individual sample does not by itself establish regulatory compliance or whether fluoride was added.
How do Pima County and Arizona compare?
A Pima County fluoridation percentage is not available in the data reviewed. Tucson’s results therefore should not be treated as a county-wide measurement or used to estimate a county-wide fluoridation rate.
In 2020, 57.7% of Arizona’s public-water-system population received fluoridated water, according to the CDC’s state and county fluoridation data. That statewide percentage does not establish the fluoridation status of Tucson’s system or describe the fluoride level at an individual address.
Does Arizona law require water fluoridation?
The sources reviewed do not establish Arizona’s current policy on community water fluoridation. The statewide percentage also does not answer whether a particular utility is required or permitted to add fluoride.
For current legal requirements, check Arizona’s statutes or ask the relevant state authority. For a local answer, ask Tucson Water directly whether it adds fluoride to the supply serving your address.
How can you check your water or remove fluoride?
Start by confirming which water system serves your address. Ask the provider for its latest drinking-water quality report and whether it adds fluoride; those are separate questions, because a report may list a measured level without explaining its source.
For a result specific to your tap, consider having a drinking-water sample analyzed by a certified laboratory. Ask the lab for its sampling instructions and fluoride reporting limit, and follow its directions for collecting and submitting the sample. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, look for a filter independently certified for fluoride reduction on the exact model you plan to use. Reverse-osmosis systems are one option, but not every filter is designed to reduce fluoride. Check the certification and follow the manufacturer’s replacement schedule; our guide to the best pitcher water filters can help you compare options.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Tucson fluoride data come from?
The measurements come from the EPA Six-Year Review 4 compliance monitoring data, under the Tucson City Of system, ID AZ0410112. They represent finished-water compliance samples collected during the stated historical period, not a new test of water at your home.
The Arizona percentage comes from the CDC’s Water Fluoridation Reporting System. It describes the share of the state’s public-water-system population receiving fluoridated water in the stated year; it is not a measurement of the Tucson system.
Frequently asked questions
Can boiling water remove fluoride?
No. Boiling can concentrate fluoride as water evaporates rather than remove it.
Does a non-detect result mean water contains no fluoride?
Not necessarily. A non-detect means fluoride was not found above the test’s reporting or detection threshold.
Does an older Tucson measurement tell me my current tap level?
No. A current sample from your tap is needed to find its level at the time of testing.