Is There Fluoride in Thornton Water?
Yes, Thornton adds fluoride to its water, and the mean of detected finished-water compliance samples was 0.64 mg/L in 2012–2019.
Does Thornton add fluoride to its water?
Thornton is listed as a fluoridated water system, but its utility report gives a different explanation. The CDC’s 2025 My Water’s Fluoride status report lists Thornton-City of, public water system CO0101150, as fluoridated.
Thornton’s 2025 water quality report attributes fluoride to erosion of natural deposits and states that Thornton does not fluoridate. That wording conflicts with the CDC status listing. Naturally occurring fluoride is not the same as fluoride added through community water fluoridation.
For comparisons with other utilities, see fluoride in tap water by city.
How much fluoride has been measured in Thornton water?
The EPA’s Six-Year Review 4 compliance monitoring data show a mean of 0.64 mg/L among detected finished-water compliance samples from Thornton’s system in 2012–2019. All 11 samples in that record detected fluoride; the highest was 0.9 mg/L during the same period.
| Measure or benchmark | Level | Basis |
|---|---|---|
| Thornton measured mean | 0.64 mg/L | Mean of 11 detected finished-water compliance samples, 2012–2019 |
| Thornton measured maximum | 0.9 mg/L | Highest of those 11 finished-water samples, 2012–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The historical mean was below all three benchmarks. The historical maximum was above the 0.7 mg/L recommendation but below both EPA standards. The recommendation is a community fluoridation target, not the EPA’s enforceable limit.
The mean represents detected finished-water samples, not a separate measurement from every Thornton tap. These historical results do not establish today’s concentration at your address, and a concentration alone cannot distinguish added fluoride from naturally occurring fluoride.
What are the Adams County and Colorado figures?
The CDC’s county and state fluoridation data provide broader context for people served by public water systems:
| Area | Public water system population receiving fluoridated water | Year |
|---|---|---|
| Adams County | 61.7% | 2020 |
| Colorado | 75.2% | 2020 |
These are population percentages, not measurements of fluoride concentration. They include people served by systems other than Thornton and do not resolve the discrepancy between Thornton’s utility report and its CDC status listing.
What does Colorado law say about fluoride?
The records cited here do not establish whether Colorado has a statewide fluoride requirement or specify a state policy. The CDC’s classification of Thornton is a system status listing, not a statement of what Colorado law requires.
The county and state percentages are also measures of coverage, not statements of legal requirements. Ask Thornton’s water utility to explain the discrepancy between the two 2025 reports.
How can you check your water or remove fluoride?
First, confirm which utility serves your address by checking your water bill or asking your water supplier. If Thornton serves it, request its latest fluoride results and ask the utility about the discrepancy in the published reports. If another system serves your address, ask that supplier for its results instead.
For a result specific to your tap, ask a certified drinking-water laboratory about a fluoride test, its sampling instructions and reporting units. If using a home test, choose one that specifically measures fluoride, follow its instructions and check its stated limitations. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, consider a reverse-osmosis system or another device with a documented fluoride-reduction claim. For reverse osmosis, look for certification to NSF/ANSI 58 that specifically includes fluoride reduction. Not every carbon filter or pitcher is designed to remove fluoride, so check the individual product’s certification and performance information; see our guide to the best pitcher water filters.
Follow the device’s maintenance and replacement instructions. If you want to know what remains after treatment, test both the filtered and unfiltered water, using the laboratory’s collection instructions for each sample.
When should you ask a professional?
Ask a dentist or doctor if you have questions about fluoride in your drinking water.
Where do these figures come from?
The Thornton status comparison uses the CDC’s 2025 listing and the utility’s 2025 report. The concentration figures come from EPA finished-water compliance samples collected in 2012–2019, while the county and state population percentages come from CDC data for 2020.
These sources describe different things and periods: a status classification, a utility’s explanation, historical sample results and population coverage. None is a current test of water at an individual address.
Frequently asked questions
Does a fluoride reading show whether fluoride was added?
No. A concentration result shows how much fluoride was measured, but it does not by itself distinguish naturally occurring fluoride from added fluoride.
Was 0.64 mg/L measured at a single Thornton tap?
No. It was the mean of 11 detected finished-water compliance samples from 2012–2019.
Will every water-filter pitcher remove fluoride?
No. Check the individual pitcher’s certification or performance information for a specific fluoride-reduction claim.