Is There Fluoride in Texas Water?
Yes, for most residents: in 2020, 71.0% of people on community water systems in Texas received fluoridated water.
That statewide figure does not tell you whether fluoride is added to your own water or how much it contains. For comparisons across local supplies, see fluoride in tap water by city.
How much of Texas’s water is fluoridated?
In 2020, 71.0% of the Texas population served by community water systems received fluoridated water, according to the CDC’s water fluoridation data. The figure describes people served by those systems, not all Texas residents or all water sources in the state.
It is a population percentage, not a fluoride concentration. It does not mean that water contains 71.0% fluoride, and it does not establish the concentration at any particular address. The statewide figure also cannot tell you whether an individual utility adds fluoride.
The year matters: the figure is a snapshot from 2020, not a current reading from your tap. For a current local answer, use your utility’s latest report and ask the utility about its present practices.
What does Texas law say about water fluoridation?
The statewide percentage does not establish whether Texas law requires or restricts fluoridation. It also does not describe the policy of any particular city or water provider.
To find the rules and decisions relevant to your address, check current Texas law and ask your water utility or local government. A utility can tell you about its own water supply; a statewide population figure cannot substitute for that local information.
Fluoride can occur naturally in source water. Detecting naturally occurring fluoride is not the same as a utility adding fluoride to its water, and a concentration alone does not show which is happening.
How can you find out about your city or utility?
Start by identifying the water provider for your address. The name may be on your water bill; if you do not receive a bill directly, ask your landlord or building manager. A city name alone may not identify the provider serving a particular home.
Look for the provider’s latest drinking water quality report, sometimes called a consumer confidence report. Check the fluoride result, its units and the sampling date. If the report lists a range as well as a reported value, read both along with the explanation of where and when samples were taken.
If the report does not answer your question, contact the utility. Ask whether it adds fluoride, whether fluoride occurs naturally in its source water, and what its latest fluoride results show. Also ask whether the report covers your address, particularly if the provider operates more than one supply or service area.
For a private well, the community-water-system percentage does not describe your individual supply. A fluoride-specific water test can provide a result for your water. The guide to how to test water quality at home explains how to approach testing.
If you are considering a filter, check the specific model’s independent certification for fluoride reduction rather than assuming every pitcher removes it. Compare options in the guide to the best pitcher water filters, and follow the model’s replacement instructions.
What do the fluoride levels mean?
Fluoride concentrations are commonly reported in milligrams per liter, written as mg/L. The following numbers serve different purposes; none is a measured statewide concentration for Texas.
| Level | What it represents |
|---|---|
| 0.7 mg/L | The US Public Health Service’s recommended level for community water fluoridation. |
| 2.0 mg/L | The EPA’s secondary standard for fluoride, which is nonenforceable at the federal level. |
| 4.0 mg/L | The EPA’s federally enforceable maximum contaminant level for fluoride in drinking water. |
The recommended fluoridation level is not the same as the EPA maximum contaminant level. When reading a local result, compare the reported concentration and its units with the relevant number rather than treating the three values as interchangeable.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Texas data come from?
The statewide percentage comes from the CDC’s community water fluoridation state and county dataset, which uses Water Fluoridation Reporting System data. The Texas figure cited here is for 2020 and represents the population served by community water systems receiving fluoridated water.
The CDC figure is useful for statewide context, but it is not a current test of your home’s water. A utility report or a fluoride-specific test is the better starting point for an address-level question. Check the date and sampling information on any local result before comparing it with the federal levels above.
Frequently asked questions
Does the 2020 Texas percentage include private well users?
The figure describes people served by community water systems, not individual private wells. A fluoride-specific test can establish the concentration in a private well’s water.
Does 71.0% mean every Texas water supply has the same fluoride level?
No. The percentage describes the share of the community-water-system population receiving fluoridated water, not a concentration for every supply. Check your provider’s report for local results.