Is There Fluoride in Tennessee Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 88.8% of people on Tennessee community water systems received fluoridated water in 2020. That figure does not establish what is in any particular city’s supply or private well. For other locations, see fluoride in tap water by city.

How much of Tennessee’s water is fluoridated?

In 2020, 88.8% of people served by Tennessee community water systems received fluoridated water, according to the CDC. This is a population-based percentage: it describes people served by those systems, not the percentage of water systems or the percentage of all Tennessee residents.

The figure does not give a fluoride concentration for the state or for an individual utility. It also does not establish whether a particular supply contains naturally occurring fluoride, added fluoride, or both. Natural fluoride in a water source is not the same thing as a utility adding fluoride through fluoridation.

The 2020 figure is a historical snapshot, not a current reading for your address. A utility’s own information is the better starting point for finding out what is in your water now.

What is Tennessee’s law or policy on fluoridation?

We found no verified information establishing whether Tennessee has a statewide fluoridation mandate or policy. The CDC percentage alone does not establish what state law requires or how decisions are made for an individual water system.

Nor does the percentage show whether a particular utility adds fluoride. Ask your water supplier directly if you want to know whether it adds fluoride, rather than relying on the statewide figure or a measured concentration alone.

A lack of a verified policy statement should not be read as proof that no law or policy exists. For a legal or policy question, check with the relevant Tennessee authority or your utility.

How can you find out about your city or utility?

Start by identifying the water system serving your address. A city name can help, but the utility name is more useful when searching for a report or asking about treatment.

  1. Check your water bill. Look for the supplier’s name and contact information. If a landlord or property manager handles the bill, ask which system serves the building.
  2. Find the utility’s water-quality report. Look for fluoride in the results and note the reporting year, units and the way the result is described. A reported average or range is not necessarily a measurement from your own tap today.
  3. Ask the utility about its practice. Ask whether it adds fluoride, whether fluoride occurs naturally in its source water, and what its latest reported concentration is. A test result alone may not identify the source of the fluoride.
  4. Consider a test for your own water. If you use a private well, the community-system percentage does not describe your supply. Ask a qualified laboratory about a fluoride test and follow its sample-collection instructions.

Our guide to how to test water quality at home explains the testing process. If you are considering a filter, compare products’ fluoride-reduction claims and testing; not every pitcher is designed to reduce fluoride. See the best pitcher water filters for a starting point.

What do fluoride levels mean?

Fluoride concentrations are commonly reported in milligrams per liter (mg/L). These numbers serve different purposes and should not be treated as interchangeable:

LevelWhat it represents
0.7 mg/LThe US Public Health Service’s recommended concentration for community water fluoridation. It is a recommendation, not the EPA maximum contaminant level.
2.0 mg/LThe EPA’s secondary standard for fluoride. Secondary standards are not federally enforceable.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride in drinking water, a federally enforceable limit.

When comparing a utility report with these values, check the units and whether the report gives an average, a range or another type of result. The statewide percentage is not a concentration and cannot be compared directly with the values in the table.

If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the Tennessee data come from?

The CDC community water fluoridation dataset provides the Tennessee percentage for 2020 through its Water Fluoridation Reporting System. The figure describes the population served by community water systems that received fluoridated water; it is not a household test result.

For an address-specific answer, use the CDC figure as context and consult the water system’s report or a laboratory result for the relevant water. Check the date on whichever result you use, since the statewide figure and a utility’s report may cover different periods.

Frequently asked questions

Does the Tennessee percentage include people who rely on private wells?

No. The 2020 percentage describes people served by community water systems, so it does not establish the fluoride level in a private well.

Can a utility report tell me the exact fluoride level at every tap in a building?

A utility report describes the water system’s reported results, not necessarily a measurement at every tap. For a result from your own tap, ask a qualified laboratory about testing.

Does a fluoride test result show whether fluoride was added?

Not by itself. Fluoride can occur naturally, so ask the utility about its treatment practices as well as its reported concentration.