Is There Fluoride in Tempe Water?
Yes, fluoride is present: Tempe’s finished-water compliance samples had a mean fluoride level of 0.29 mg/L in 2012–2019, but whether the utility adds fluoride is not reported.
Does Tempe add fluoride to its water?
The available measurements show that fluoride was present, but they do not establish whether it was naturally occurring, added by the utility, or a combination of both. The presence of natural fluoride alone is not evidence that a water system fluoridates its supply.
The measurements are also historical, not a current tap-water result. For comparisons with other communities, see fluoride in tap water by city.
How much fluoride was measured in Tempe water?
The EPA’s Six-Year Review 4 data include 75 finished-water compliance samples for the City of Tempe from 2012–2019. All 75 samples had detectable fluoride. The following results describe that sample set, not necessarily the water coming from a particular tap today.
| Measurement | Level | Year and basis |
|---|---|---|
| Mean | 0.29 mg/L | 2012–2019; mean of detected finished-water compliance samples |
| Maximum | 0.81 mg/L | 2012–2019; highest detected finished-water compliance sample |
For context, these are the relevant federal reference levels:
| Reference | Fluoride level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A generally non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | The federal drinking-water limit |
The historical mean was below the recommended fluoridation level, while the highest sample was above it. Both were below the EPA secondary standard and maximum contaminant level. Those comparisons do not establish whether Tempe adds fluoride or, by themselves, determine regulatory compliance.
What is the fluoride context in Maricopa County and Arizona?
Tempe is in Maricopa County, but a countywide fluoridation percentage is not available in the data used here. The Tempe measurements should not be treated as a countywide result: neighboring water systems may have different sources, practices and measurements.
For Arizona as a whole, CDC data show that 57.7% of the population served by public water systems received fluoridated water in 2020. That statewide figure does not identify the fluoridation status of Tempe’s utility or tell an individual household what is in its water.
What does Arizona policy say about fluoridation?
The available information does not establish a statewide fluoridation policy or a policy governing Tempe’s decision. It also does not report whether Tempe’s utility adds fluoride.
A state percentage or a detected fluoride result cannot fill those gaps. For the current policy and utility practice, ask the water provider serving your address or the relevant Arizona drinking-water authorities directly.
How can you check your water or reduce fluoride?
First, confirm which provider serves your address; a water bill or the provider’s customer-service office can help. Ask for its latest drinking-water quality report and whether it adds fluoride. A historical citywide measurement may not represent your current water, especially if your address is served by a different system or a private well.
For a result specific to your tap, use a laboratory that offers a fluoride test and follow its sample-collection instructions. Ask the lab how to interpret the result and whether the sample should be collected before or after any household treatment. Our guide explains how to test water quality at home.
If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction, and check the certification for the specific model and replacement cartridge. Reverse osmosis systems and some activated alumina filters can reduce fluoride, but not every filter is designed or certified to do so. Compare product claims carefully when considering the best pitcher water filters.
Follow the manufacturer’s maintenance and cartridge-replacement instructions. Boiling water does not remove fluoride and can concentrate it as water evaporates. If you have questions about fluoride in drinking water, ask a dentist or doctor.
Where does the Tempe fluoride data come from?
The historical Tempe measurements come from the EPA Six-Year Review 4 compliance monitoring data, covering 2012–2019. The fluoride dataset identifies the City of Tempe water system as AZ0407100 and includes finished-water sample results.
The Arizona percentage comes from the CDC community water fluoridation state and county dataset for 2020. The two sources answer different questions: the EPA data report measured concentrations, while the CDC figure describes the state’s public-water-system population receiving fluoridated water.
Frequently asked questions
What does mg/L mean on a fluoride report?
It means milligrams per liter. In dilute drinking water, 1 mg/L is approximately equal to 1 part per million.
Can you tell whether water contains fluoride by tasting it?
Taste is not a reliable way to determine whether fluoride is present or measure its concentration. A fluoride-specific test can provide a measurement.
Can a home tap result differ from a finished-water sample?
Yes. Results can differ by location and time, and household treatment can affect a tap sample. A finished-water result is not necessarily a measurement from your home.