Is There Fluoride in Syracuse Water?
Yes, fluoride is present: Syracuse’s detected finished-water compliance samples averaged about 0.6 mg/L in 2012–2019, but whether the utility adds fluoride is not reported.
Is fluoride added to Syracuse water or naturally present?
The available result establishes that fluoride was detected in Syracuse’s finished water. It does not establish whether the fluoride was naturally present, added by the utility, or came from a combination of sources.
A fluoride measurement alone cannot distinguish natural fluoride from a community water fluoridation program. For comparisons with other utilities, see fluoride in tap water by city.
The historical result also does not tell you the fluoride concentration at a particular Syracuse address today. Ask the utility for its latest report and the system serving your address if you need a current answer.
How much fluoride was measured in Syracuse water?
The EPA’s Six-Year Review 4 compliance monitoring data includes seven finished-water samples for Syracuse City from 2012–2019. Fluoride was detected in all seven samples.
| Syracuse measurement | Level | Year and basis |
|---|---|---|
| Mean | About 0.6 mg/L | 2012–2019; mean of detected finished-water compliance samples |
| Maximum | 0.89 mg/L | 2012–2019; highest of the finished-water compliance samples |
These are historical measurements from finished water, not a current test of water at a home tap. The mean summarizes the detected samples; the maximum is the highest individual result in that set.
| Comparison | Level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation, not a maximum limit |
| EPA secondary standard | 2.0 mg/L | A secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | The enforceable federal limit |
The historical Syracuse mean was below the recommended fluoridation level and both EPA standards. The highest sample exceeded the recommended level but was below both EPA standards; the recommendation is not a maximum limit.
What do the county and state figures show?
Syracuse is in Onondaga County, but the figures cited here do not establish a countywide fluoridation percentage. A county figure would not, by itself, determine whether the Syracuse utility adds fluoride or identify the supplier for every address in the county.
The CDC’s state and county fluoridation data reports that 71.5% of New York’s population served by public water systems received fluoridated water in 2020. That statewide figure is not a measurement of fluoride in Syracuse water and does not establish Syracuse’s fluoridation status.
What is New York’s law or policy on fluoridation?
The available information does not specify New York’s current fluoridation law or state policy. It also does not establish a local decision by Syracuse to add fluoride or to rely only on naturally occurring fluoride.
For the policy currently applicable to your service area, ask the Syracuse water utility or the New York State Department of Health. You can ask separately whether fluoride is added, what policy governs that decision, and where to find the latest water-quality report. A measured fluoride level and a policy on adding fluoride answer different questions.
How can you check your water or remove fluoride?
Start by identifying your water supplier. A Syracuse mailing address does not necessarily identify the water system, so check your water bill or ask the utility or property manager which system serves the property. If you use a private well, a city utility report will not describe that well’s water.
Ask your supplier for its latest fluoride results and whether it adds fluoride. For a result at your own tap or well, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, reverse osmosis and distillation are treatment options. Check the specific device’s independent certification and performance information for a fluoride-reduction claim; not every filter or cartridge removes fluoride. Follow the manufacturer’s maintenance and replacement instructions so the device can perform as intended.
Do not assume a standard carbon pitcher removes fluoride. When comparing the best pitcher water filters, check the individual model’s fluoride-reduction claim rather than relying on the pitcher format alone. Boiling is not a fluoride-removal method and can concentrate fluoride as water evaporates.
Who should ask for advice?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does this information come from?
The Syracuse measurements come from EPA compliance monitoring records for the Syracuse City public water system, identified as NY3304334. The records summarize detected finished-water samples from 2012–2019; they do not establish the current concentration at an individual tap or whether the utility added fluoride.
The New York percentage comes from the CDC’s Water Fluoridation Reporting System data for 2020. It describes the state population served by public water systems, rather than Syracuse’s local water supply.
Frequently asked questions
What does mg/L mean on a water report?
It means milligrams per liter, a way to express the concentration of fluoride in water.
Is the maximum fluoride result the same as the mean?
No. The maximum is the highest individual result in a sample set; the mean is the average of the results used in the calculation.