Is There Fluoride in Stockton Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added; any fluoride in the City of Stockton water system is naturally occurring. For comparisons with other locations, see fluoride in tap water by city.

Is there fluoride in Stockton water?

The CDC lists the City of Stockton water system as not fluoridated in its 2025 status report. That means fluoride is not added; it does not mean the water necessarily contains zero fluoride. Natural fluoride can be present in water without the system adding it.

The report also labels the system “consecutive.” A consecutive system receives some or all of its water from another public water system. That label alone does not identify the supplier or provide a fluoride concentration for a particular address.

The CDC listing is for the City of Stockton system, identified as CA3910012. If you live in Stockton, check your water bill to confirm which system serves your address before applying that listing to your tap.

How much fluoride is in Stockton water?

No measured fluoride concentration for the City of Stockton is available in the data cited here. The 2025 status report indicates whether the system is fluoridated; it does not provide a measured level in this account. A status of “not fluoridated” cannot be converted into a concentration.

These federal figures provide context for a measurement, but none is a Stockton reading:

Federal benchmarkFluoride concentrationWhat it represents
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LA non-enforceable secondary drinking water standard
EPA maximum contaminant level4.0 mg/LAn enforceable drinking water limit

Because a Stockton measurement is not available here, the system cannot be compared numerically with those benchmarks. The 0.7 mg/L recommendation is a target for communities that fluoridate their water, not a measurement of naturally occurring fluoride in Stockton.

How do San Joaquin County and California compare?

In 2020, 0.1% of San Joaquin County's public water system population received fluoridated water, according to CDC county-level data. For California as a whole, the corresponding figure was 57.5% in 2020.

Those figures describe populations served by public water systems, not necessarily every county or state resident. They also describe fluoridation coverage rather than measured fluoride concentrations.

The county percentage is not a measurement for the City of Stockton utility, and the state percentage does not establish the status of any individual system. The county and state figures are from 2020; the City of Stockton status cited above is from 2025.

What does California policy say about Stockton?

The CDC reports do not establish whether a specific California fluoridation requirement applies to the City of Stockton. The federal figures above are benchmarks, not evidence of a state mandate for this system.

For current California rules and their application to a particular supplier, ask the state's drinking water regulator or the supplier named on your bill. The system's CDC status and the legal requirements that might apply to it are separate questions.

How can you check your water or remove fluoride?

Start by identifying your water supplier on your bill, then request its latest annual drinking water quality report. Look for a fluoride result, its units, the sampling year and whether the report describes a range or another type of result. A system-wide report may not be a direct measurement of your individual tap.

You can also ask the supplier whether it has a current fluoride result for your service area and what the result represents. If you want a measurement at your tap, use a laboratory that tests drinking water for fluoride and follow its sample-collection instructions. Our guide to how to test water quality at home explains how to approach testing.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Reverse osmosis and activated alumina are treatment options; check the particular product's certification and instructions rather than assuming every filter removes fluoride. Ordinary carbon filtration should not be assumed to remove it.

For pitcher options, compare the specific contaminants each model is certified to reduce in our guide to the best pitcher water filters. Follow the manufacturer's replacement schedule, and consider a before-and-after laboratory test if you want to check the result at your tap.

Where does the data come from?

The CDC fluoridation status report lists the City of Stockton system as not fluoridated and consecutive for 2025. It identifies the system by its public water system number, CA3910012.

The CDC state and county fluoridation dataset supplies the 2020 California and San Joaquin County coverage figures. These are population percentages, not utility fluoride measurements.

For a concentration rather than a fluoridation status, consult the appropriate supplier's current water quality report or arrange a test. Check the report's sampling year and units before comparing a result with a federal benchmark.

When should you ask a professional?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Frequently asked questions

Does boiling Stockton water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can increase the concentration left in the water.

Is mg/L the same as parts per million for fluoride in water?

For water, 1 mg/L is approximately equal to 1 part per million, or 1 ppm.