Is There Fluoride in Sterling Heights Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride to Sterling Heights water; the reported average was 0.58 mg/L in 2025.

Is fluoride added to Sterling Heights water?

Sterling Heights water is fluoridated: the utility adds a fluoride product, identified as H2SiF6. This is added fluoride, not merely a report of fluoride that occurs naturally in water.

The CDC’s 2025 fluoridation status report lists the Sterling Heights public water system as fluoridated. For comparisons with other communities, see fluoride in tap water by city.

The status report identifies whether the system is fluoridated; the utility’s water quality report supplies the measured concentration. Both are useful because a yes-or-no status alone does not tell you how much fluoride was measured.

How much fluoride is in Sterling Heights water?

The 2025 Sterling Heights water quality report reports an average fluoride concentration of 0.58 mg/L. The report expresses the result in parts per million (ppm), which is equivalent to mg/L for this drinking-water measurement.

MeasureFluoride concentration
Sterling Heights measured average, 20250.58 mg/L
US Public Health Service recommended level for community water fluoridation0.7 mg/L
EPA secondary standard2.0 mg/L
EPA maximum contaminant level4.0 mg/L

The 2025 Sterling Heights average was below all three reference values. These values have different purposes: the 0.7 mg/L figure is a recommended level for community water fluoridation, the 2.0 mg/L figure is a secondary standard, and the 4.0 mg/L figure is the enforceable federal maximum contaminant level.

An average is a summary of the utility’s reported measurements, not a guarantee that every sample from every tap will have exactly the same concentration. Check a newer utility report or test your tap if you need a more current or location-specific result.

How does Sterling Heights compare with Macomb County and Michigan?

In 2020, 97.2% of the public-water-system population in Macomb County received fluoridated water. The corresponding figure for Michigan was 89.3%, according to CDC state and county fluoridation data.

Those percentages describe the share of people served by public water systems receiving fluoridated water. They are not fluoride concentrations, and they do not replace the Sterling Heights utility’s measured result.

The county and state figures also describe 2020, while the local average and fluoridation status above are reported for 2025. They should be read as context from different reporting periods, not as simultaneous measurements of Sterling Heights water.

Does Michigan law require water fluoridation?

We could not verify a statewide requirement or policy from these reports. Contact Michigan’s drinking water regulator for current information about state law and policy.

The fact that Sterling Heights adds fluoride does not, by itself, establish that a statewide mandate requires every public water system to do the same. Likewise, the county and state percentages show reported coverage, not the legal reason for any individual system’s status.

How can you check or remove fluoride from your water?

Start with the latest Sterling Heights water quality report and look for its fluoride row. Check the report year, the unit and whether the result is an average, a range or another type of measurement before comparing it with the values above.

For a result from your own tap, use a laboratory that tests drinking water for fluoride. Ask for sampling instructions and follow them when collecting and returning the sample. Our guide to how to test water quality at home explains how to approach testing.

If your water comes from a private well rather than the city system, the Sterling Heights utility average does not establish the fluoride concentration in your well. A fluoride test of that water is the way to find out.

Reverse osmosis and distillation can reduce fluoride, but performance depends on the specific device and its maintenance. Look for independent certification that specifically covers fluoride reduction, and follow the manufacturer’s instructions for replacing components. Not every pitcher or refrigerator filter is designed to remove fluoride; see the best pitcher water filters and check each model’s certification before choosing one.

Boiling is not a reliable way to remove fluoride: as water evaporates, fluoride can become more concentrated. If you have questions about fluoride in your water, ask a dentist or doctor.

Where does the Sterling Heights fluoride data come from?

The local concentration comes from the fluoride row in the Sterling Heights 2025 annual water quality report. Its 0.58 mg/L value is the reported average, rather than a result from a particular household tap.

The local fluoridation status comes from the CDC’s 2025 My Water’s Fluoride status report for Sterling Heights. The county and statewide coverage figures come from the CDC’s 2020 community water fluoridation dataset.

Together, these sources answer different questions: whether the local system adds fluoride, what average the utility reported, and how widespread fluoridated public water was in the county and state. For a current decision about your own water, check the latest report or arrange a tap test.

Frequently asked questions

Does boiling Sterling Heights water remove fluoride?

No. Boiling is not a reliable fluoride-removal method and can concentrate fluoride as water evaporates.

Does every refrigerator filter remove fluoride?

No. Check the specific filter’s independent certification for fluoride reduction rather than assuming it removes fluoride.