Is There Fluoride in St. Paul Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, St. Paul Regional Water Services adds fluoride; its reported average was 0.7 mg/L in 2025.

That makes St. Paul a fluoridated water system, rather than a system with only naturally occurring fluoride. For comparisons with other utilities, see fluoride in tap water by city.

Does St. Paul add fluoride to its water?

Yes. The utility’s water quality report identifies fluoride as an additive, and the CDC’s 2025 fluoridation status report lists Saint Paul Regional Water Services as fluoridated. The CDC identifies the system as MN1620026.

Fluoride can occur naturally in water, but that is distinct from a utility adding it. In St. Paul’s case, the utility reports an additive, so the answer is not based solely on the presence of naturally occurring fluoride.

How much fluoride is in St. Paul water?

The St. Paul Regional Water Services water quality report gives a 2025 average of 0.7 mg/L and a 2025 reported range of 0.69–0.72 mg/L. The report expresses these results in parts per million, approximately equivalent to milligrams per liter for water.

Measure or benchmarkFluoride levelWhat it represents
St. Paul average, 20250.7 mg/LAverage reported by the utility
St. Paul range, 20250.69–0.72 mg/LRange reported by the utility
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary drinking water standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking water limit

The 2025 average matches the US Public Health Service recommendation. Both the average and the reported range are below the EPA’s secondary standard and its maximum contaminant level. These figures describe the utility’s reported results; they are not a measurement from every individual tap.

How do Ramsey County and Minnesota compare?

In 2020, 99.6% of Ramsey County’s public-water-system population received fluoridated water. The corresponding figure for Minnesota was 98.8%. Both figures come from the CDC’s state and county fluoridation dataset.

These percentages describe populations served by public water systems, not all residents or every water source. They provide context for St. Paul, but neither percentage is a direct measurement of fluoride at a St. Paul tap.

The county and state figures are also from 2020, while the utility’s fluoride results are from 2025. They answer different questions: how many people served by public systems received fluoridated water, and how much fluoride the St. Paul utility reported.

What is Minnesota’s fluoride law or policy?

A statewide fluoride law or policy is not confirmed by the information available here. St. Paul’s reported use of an additive establishes what its utility reports doing; it does not, by itself, establish a requirement for every water system in Minnesota.

For a question about a particular system, check that system’s current water quality report and ask the utility about its treatment practices. Do not use the county percentage alone to determine whether an individual address receives fluoridated water.

How can you check or remove fluoride from your water?

First, identify the water supplier for your address. If it is St. Paul Regional Water Services, use its water quality report for the system-wide results. If you use a private well or another supplier, the St. Paul utility average does not establish the fluoride level in your water.

For a result specific to your tap or well, use a laboratory that tests drinking water for fluoride and follow its sample-collection instructions. Our guide to how to test water quality at home explains how to approach testing and read results.

If you want to reduce fluoride, options include reverse osmosis and certain activated alumina filters. Look for independent certification to NSF/ANSI 53 or 58 specifically for fluoride reduction, and check that the certification applies to the model and cartridge you plan to use. Not every pitcher or filter is designed to reduce fluoride; our guide to the best pitcher water filters can help you compare options.

When should you ask a professional?

If you have questions about fluoride in your drinking water or what is appropriate for your household, ask a dentist or doctor.

Where does the data come from?

The fluoride average and range come from St. Paul Regional Water Services’ report for 2025. The utility’s report is the source for the concentration figures; the CDC’s 2025 status report separately identifies the system as fluoridated.

The Ramsey County and Minnesota percentages come from the CDC’s 2020 state and county dataset. Because those figures use the public-water-system population as their basis, they should not be read as percentages of every resident or as measurements for private wells.

Frequently asked questions

Is 1 ppm of fluoride the same as 1 mg/L?

For water, 1 part per million is approximately equal to 1 milligram per liter. St. Paul’s report uses parts per million.

Does boiling St. Paul water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Can I use a fluoride-reduction filter cartridge indefinitely?

No. Follow the manufacturer’s replacement schedule and check that the replacement cartridge is certified for fluoride reduction.