Is There Fluoride in South Carolina Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 91.7% of people on community water systems in South Carolina received fluoridated water in 2020.

That statewide figure does not establish the fluoride concentration at an individual tap. For local comparisons, see fluoride in tap water by city, and check your own water provider’s report for its measurements.

How much of South Carolina’s water is fluoridated?

In 2020, 91.7% of people served by South Carolina community water systems received fluoridated water, according to the CDC’s community water fluoridation dataset. That is a percentage of people served, not a percentage of water systems or cities.

A community water system serves a population in the same area year-round. The state figure does not cover every possible source of drinking water, such as private wells, and it does not identify the concentration in a particular system.

The figure is also from 2020. It should not be treated as a current measurement for your address or as proof of what your provider does today.

What is South Carolina’s law or policy on fluoride?

The CDC figure does not establish South Carolina’s current law or policy on adding fluoride to drinking water. It does not, by itself, establish whether there is a statewide mandate or prohibition. For current requirements, check with the South Carolina drinking-water authority or ask your water provider.

Fluoride can occur naturally in water. A test showing fluoride is present does not by itself show that a utility added it or that the system fluoridates its water. Ask the provider whether fluoride is naturally present, added during treatment, or both.

How can you find out about your city or water utility?

Start with the name of the water provider on your bill. If you rent or do not receive a water bill, ask the property owner or manager which system supplies the building. A city name alone may not identify the provider for every address in the area.

Look for the provider’s latest annual drinking water quality report, also called a Consumer Confidence Report. Find the fluoride entry and note its concentration in milligrams per liter (mg/L), the sample year and whether the reported result is an average, a range or another type of measurement. The report may use data collected before the year in which it was published.

If the report is unclear or does not answer your question, contact the utility. Ask for its latest fluoride results, when and where samples were collected, and whether it adds fluoride. The statewide percentage cannot answer those local questions.

If your home uses a private well, the community-system percentage does not tell you what is in your well water. A laboratory test can provide a result for your source; learn more about how to test water quality at home.

If you are considering the best pitcher water filters, check the exact model and cartridge for certification specifically for fluoride reduction. A general filtering claim does not establish that a pitcher reduces fluoride.

What do the fluoride levels mean?

These national reference values serve different purposes. They are concentrations in water, not percentages of people receiving it.

Reference valueMeaning
0.7 mg/LThe US Public Health Service’s recommended concentration for community water fluoridation. It is not the EPA’s maximum contaminant limit.
2.0 mg/LThe EPA’s secondary standard for fluoride, a non-enforceable federal guideline.
4.0 mg/LThe EPA’s enforceable maximum contaminant level for fluoride in public drinking water systems.

Compare a local result in mg/L with the reference relevant to your question, while also checking how and when the result was measured. A single sample, a reported range and a system’s compliance determination are not necessarily the same thing. The federal public-water limit does not make a private well a regulated public water system.

If a result appears to exceed a standard, ask your provider or drinking-water authority how the result was measured and what it means for that system.

Who can answer personal questions?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the South Carolina data come from?

The statewide percentage comes from the CDC’s Water Fluoridation Reporting System, published through its community water fluoridation dataset. Its basis is the population served by community water systems, and the South Carolina figure above is for 2020.

The dataset is useful for a statewide picture, but it is not a test of your tap. Your utility’s report or a test of your own water is the better starting point for a local concentration.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride and may concentrate it as water evaporates.

Can you tell whether water contains fluoride by looking at it?

No. Use a water quality report or a fluoride test to find out whether it is present.