Is There Fluoride in Santa Fe Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride to Santa Fe’s water supply as needed, but the fluoride level is not reported.

The 2025 Santa Fe utility water quality report states that fluoride is added as needed. For other communities, see fluoride in tap water by city.

Does Santa Fe add fluoride to its water?

Yes. Santa Fe’s utility says it adds fluoride to the water supply as needed. That is a statement about added fluoride, not just fluoride that occurs naturally in water.

The report statement establishes the utility’s practice, but it does not give a fluoride concentration in the information available for this summary. It also does not establish the level at a particular Santa Fe tap today. To find that out, ask the utility for its latest fluoride results or have a tap-water sample tested.

How much fluoride is in Santa Fe water?

A measured fluoride level for Santa Fe is not available here, so it cannot be compared numerically with the federal figures below. The 2025 date identifies the utility report, not a year for a reported fluoride measurement.

ReferenceFluoride levelWhat it means
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LA federal secondary drinking-water standard
EPA maximum contaminant level4.0 mg/LThe enforceable federal limit for public water systems

The three figures serve different purposes. The US Public Health Service recommendation is not a measurement of Santa Fe water. The EPA secondary standard is a non-enforceable federal guideline, while the maximum contaminant level is an enforceable limit for public water systems.

Without a local test result, none of these figures tells you whether the fluoride concentration at your tap is above or below a particular reference level. Check the unit on any result you receive: the comparisons above use milligrams per liter, written as mg/L.

What are the county and state figures?

A Santa Fe County percentage is not available in the information used for this summary. The city utility’s statement should not be taken as a percentage for the county or as confirmation of the practice of every water system in it.

The CDC’s state and county fluoridation dataset reports that 76.8% of New Mexico’s public-water-system population received fluoridated water in 2020. That is a statewide population figure, not a Santa Fe measurement, and its denominator is people served by public water systems rather than all state residents.

What is New Mexico’s law or policy on fluoridation?

The available information does not establish whether New Mexico requires or prohibits community water fluoridation. Santa Fe’s utility statement describes what that utility does; it should not be read as evidence of a statewide requirement or a policy for another water system.

If you need the current policy for a particular address, identify the water provider and ask it directly. A provider can confirm whether its report applies to that address and point you to its current water-quality information.

How can you check your water or remove fluoride?

Start by checking who supplies your water. A Santa Fe utility report is useful for customers of that system, but a report from a different provider—or a test of a private well—is more relevant if it supplies your address.

Ask your provider for its latest fluoride result and the date and sampling basis for that result. For a measurement from your own tap, use a drinking-water laboratory that tests for fluoride and follow its sampling instructions. Our guide explains how to test water quality at home.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction, and follow its installation and cartridge-replacement instructions. Reverse-osmosis systems and distillers can reduce fluoride when appropriately selected and maintained. Do not assume that every pitcher filter removes it; check the specific model’s certified claims when comparing the best pitcher water filters.

Boiling water is not a fluoride-removal method. If water evaporates during boiling, fluoride can become more concentrated in the water that remains.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does this information come from?

The Santa Fe answer comes from the utility’s 2025 water quality report, linked above, which says fluoride is added as needed. The report statement identifies an added-fluoride practice; no local concentration is reported in the information available for this summary.

The New Mexico percentage comes from the CDC dataset linked above and refers to 2020. The federal comparison figures are the US Public Health Service recommendation and EPA drinking-water standards. They are reference values, not substitutes for a measured result from Santa Fe or your own tap.

Frequently asked questions

Can you tell whether water contains fluoride by looking at it?

No. Clear-looking water can contain fluoride; a test is needed to determine its concentration.

Does a standard water softener remove fluoride?

A conventional water softener is not designed to remove fluoride. Check a device’s certified claims if fluoride reduction is your goal.