Is There Fluoride in Santa Barbara Water?
No fluoride is added to Santa Barbara water; it contains natural fluoride only, with a reported average of 0.45 mg/L in 2025. The city’s status is different from that of some other water suppliers, so check your supplier rather than relying on a regional description. For comparisons, see fluoride in tap water by city.
Does Santa Barbara add fluoride to its water?
No. The CDC’s 2025 status report lists the City of Santa Barbara Water Department as not fluoridated and describes its status as Non-Adjusted. That means the city is not adding fluoride to adjust its concentration.
Non-adjusted does not mean fluoride-free. Fluoride can occur naturally in water, and the city’s report records a measurable amount. The city status describes that particular water department; it does not establish the status of every supplier in Santa Barbara County.
How much fluoride is in Santa Barbara water?
The city’s water quality report gives an average fluoride concentration of 0.45 mg/L for 2025, with a reported range of 0.42–0.50 mg/L for 2025. Both the average and the range are below the comparison levels in the table.
| Measure or benchmark | Fluoride level | Meaning |
|---|---|---|
| Santa Barbara reported average, 2025 | 0.45 mg/L | Average measured level in the utility report |
| Santa Barbara reported range, 2025 | 0.42–0.50 mg/L | Range of measured levels in the utility report |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Secondary drinking water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking water limit |
The 0.7 mg/L recommendation is a benchmark for community water fluoridation, not a requirement that an unadjusted system reach that concentration. The EPA’s 2.0 mg/L secondary standard is not federally enforceable; the 4.0 mg/L maximum contaminant level is an enforceable federal limit.
The utility report expresses fluoride in parts per million, or ppm. For a water measurement, 1 ppm is approximately equivalent to 1 mg/L. An annual average does not guarantee the same concentration at every tap or on every day.
How do Santa Barbara County and California compare?
In 2020, 4.2% of Santa Barbara County’s public water system population received fluoridated water, according to CDC data. The corresponding figure for California was 57.5%.
These percentages describe populations served by public water systems, not measurements of fluoride at individual taps. They also describe 2020, while the city’s non-adjusted status and reported fluoride measurements are from 2025. Neither percentage establishes whether a particular address receives water from a fluoridated system.
What does California law say about fluoridation?
The source data do not specify California’s fluoridation policy or establish what state law requires of a particular water system. Santa Barbara’s non-adjusted status should therefore not be treated as a statement about the legal requirements for every California supplier.
For a current answer about a particular system, ask the water supplier for its fluoridation status and the rules applicable to it. A water quality report can help establish what the supplier measured, while the supplier can clarify its current operating status.
How can you check your water or remove fluoride?
Start by identifying the supplier on your water bill or asking your building manager. If you use a private well, the city utility’s report does not describe your well water.
- Find your supplier’s latest water quality report and look for its fluoride entry. Check the sampling year, reported average and range, and whether the supplier says it adjusts fluoride.
- Ask the supplier if you need a more current status or want to understand which results apply to your address.
- Consider a laboratory test if you want a result for your own tap or private well. Ask a certified drinking water laboratory for its sampling instructions and a fluoride test. Our guide explains how to test water quality at home.
- Choose a treatment device with an independently verified fluoride-reduction claim if you want to reduce fluoride. Some reverse-osmosis and distillation systems can reduce it; check the claim for the exact device and replacement components.
- Maintain the device according to its instructions. Do not assume that every pitcher, carbon filter or refrigerator filter removes fluoride. Our guide to the best pitcher water filters can help you compare options, but check each model’s specific fluoride claim.
Boiling water is not a way to remove fluoride; evaporation can leave the remaining water more concentrated.
Who should ask a professional?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the data come from?
The city result and the regional figures come from three sources:
- The City of Santa Barbara’s 2026 Water Quality Report reports the 2025 fluoride average and range.
- The CDC fluoridation status report identifies the City of Santa Barbara Water Department as non-adjusted in 2025.
- The CDC state and county fluoridation dataset provides the 2020 county and California population percentages.
Check the latest utility report and supplier information when making a decision, since the figures above refer to specific reporting years.
Frequently asked questions
Does non-adjusted mean Santa Barbara water is fluoride-free?
No. It means the city does not add fluoride to adjust its concentration; naturally occurring fluoride is still present.
What is the City of Santa Barbara Water Department’s system ID?
Its public water system ID is CA4210010.
Does boiling Santa Barbara tap water remove fluoride?
No. Boiling can evaporate water and leave fluoride more concentrated in what remains.