Is There Fluoride in San Jose Water?
No fluoride is added; San Jose Water Company’s water contains naturally occurring fluoride, with a measured mean of about 0.22 mg/L in detected finished-water samples from 2012–2019.
Is fluoride added to San Jose water?
The CDC’s 2025 fluoridation status report lists San Jose Water Company, system ID CA4310011, as non-adjusted. That means fluoride is not added to adjust its level; it does not mean the water is fluoride-free.
The status applies to San Jose Water Company, not automatically to every water supplier serving an address in San Jose. Check your bill or ask your supplier which system serves you. For comparisons with other locations, see fluoride in tap water by city.
How much fluoride has been measured?
EPA compliance-monitoring data for San Jose Water Company include 84 finished-water samples from 2012–2019. Fluoride was detected in 66 of those samples. The mean below is for detected samples, not an average that includes every sample.
| Measurement or reference | Fluoride level | Basis |
|---|---|---|
| Historical measured mean | 0.22 mg/L | Mean of detected finished-water compliance samples, 2012–2019 |
| Historical measured maximum | 0.79 mg/L | Highest finished-water sample, 2012–2019 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The historical mean of detected samples was below all three reference levels. The historical maximum was above the recommended fluoridation level but below the two EPA standards. The 0.7 mg/L recommendation is a target for community water fluoridation, not an EPA maximum contaminant level.
These are historical measurements, not a guarantee of the fluoride level at a particular tap today. They also do not, by themselves, establish a system’s current regulatory compliance.
How does San Jose compare with the county and state?
In 2020, 41.2% of Santa Clara County’s public water system population received fluoridated water, according to CDC data. Across California, the corresponding figure was 57.5% in 2020.
These percentages describe the share of people served by public water systems receiving fluoridated water; they are not fluoride concentrations. Neither figure establishes whether fluoride is added by a particular supplier. San Jose Water Company’s non-adjusted status is a separate, system-specific record.
What is California’s fluoride policy?
The CDC coverage figures show how many people received fluoridated public water in 2020; they do not describe the requirements of California law. They also do not establish the current policy for a particular water system.
For current legal requirements, check California’s drinking-water rules or ask the state drinking-water regulator. For the status of your own supply, ask your water provider rather than relying on a statewide percentage or assuming that every system follows the same practice.
How can you check or remove fluoride from your water?
Start with your water bill to identify your supplier. If you do not receive the bill directly, ask your landlord or property manager. You can also ask the supplier to confirm the water system serving your address and request its latest water-quality report.
Look for a fluoride result in mg/L and note the sampling period. A newer report may differ from the 2012–2019 measurements above, and the company-wide historical mean is not a measurement from your individual tap. If you want a tap-specific result, ask about a suitable water test; our guide explains how to test water quality at home.
If you want to reduce fluoride, consider a reverse-osmosis system or an activated-alumina treatment product that is independently certified specifically for fluoride reduction. Check the product’s certification and installation requirements, and replace components as directed. A general water-filter claim does not establish that a product reduces fluoride.
Pitcher filters vary, so check the specific model’s certified claims before buying. See our guide to the best pitcher water filters and verify whether any model you consider is certified for fluoride reduction.
When should you ask a dentist or doctor?
If you have questions about fluoride in your drinking water or your test results, ask a dentist or doctor.
Where does the data come from?
The CDC fluoridation status report identifies San Jose Water Company as non-adjusted in 2025. Its status record is distinct from the older sampling results.
The EPA Six-Year Review 4 compliance-monitoring data contain the 2012–2019 finished-water samples used for the historical mean and maximum. The CDC state and county fluoridation dataset supplies the 2020 Santa Clara County and California coverage percentages.
Frequently asked questions
Is fluoride in mg/L the same as fluoride in parts per million?
In dilute drinking water, 1 mg/L is approximately 1 part per million, or ppm.
Can a fluoride test tell whether fluoride was naturally present or added?
A standard concentration test measures how much fluoride is present, not whether it was naturally present or added. Ask your water supplier about its fluoridation status.
Does an ordinary water softener reliably remove fluoride?
An ordinary water softener is not designed to reliably remove fluoride. Look for a treatment product independently certified for fluoride reduction.