Is There Fluoride in San Bernardino Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added; San Bernardino’s water contains natural fluoride only, averaging about 0.41 mg/L in the utility’s 2025 report.

Does San Bernardino add fluoride to its water?

San Bernardino’s water is listed as non-adjusted, meaning the utility does not add fluoride to adjust its concentration. That is different from having no fluoride in the water: naturally occurring fluoride is still present.

The CDC’s 2025 fluoridation status report lists San Bernardino City’s system as not fluoridated and identifies its status as non-adjusted. For comparisons with other systems, see fluoride in tap water by city.

The city’s status describes its public water system, not every water source or supplier in San Bernardino County. Check your own supplier before applying the city’s figures to your address.

How much fluoride is in San Bernardino water?

The San Bernardino Municipal Water Department’s 2025 water quality report lists an average fluoride concentration of 0.41 mg/L, with a range of 0.24–1.10 mg/L. The fluoride row identifies 2023 as the sampling year; the figures are measurements reported in the 2025 report.

Measurement or benchmarkFluoride concentrationBasis
San Bernardino average0.41 mg/LMeasured average from 2023 sampling, reported in 2025
San Bernardino range0.24–1.10 mg/LMeasured range from 2023 sampling, reported in 2025
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LSecondary drinking-water standard
EPA maximum contaminant level4.0 mg/LFederal drinking-water limit

The measured average was below all three benchmarks. The top of the measured range was above the 0.7 mg/L recommendation but below both the 2.0 mg/L secondary standard and the 4.0 mg/L limit.

The 0.7 mg/L figure is a recommendation for systems that fluoridate their water, not a maximum limit. The 2.0 mg/L figure is a secondary standard; the 4.0 mg/L figure is the EPA’s maximum contaminant level.

How does San Bernardino compare with the county and state?

In 2020, 3.6% of the public-water-system population in San Bernardino County received fluoridated water, compared with 57.5% statewide in California. These figures come from the CDC’s state and county fluoridation data.

The percentages describe people served by public water systems, not the percentage of water systems or necessarily the percentage of all residents. They also cover different areas from the San Bernardino City utility.

The county and state figures are from 2020, while the city’s non-adjusted status is from the CDC’s 2025 report. They provide context, but they do not establish the status of another supplier at a particular address.

What does California law say about fluoridation?

The cited records do not establish the current requirements of California law or policy on community water fluoridation. San Bernardino City’s non-adjusted status alone does not tell you what rules apply to another water system.

For a current answer about state requirements or a particular supplier, contact California’s drinking-water regulator or the water supplier serving your address. Ask separately about the applicable policy and the supplier’s actual fluoridation status: a policy and a system’s reported status are not the same thing.

How can I check or remove fluoride in my water?

Start by identifying your water supplier on your bill or asking the property manager. Request its latest consumer confidence report and look for the fluoride row, including the sampling year, average and range. A report for San Bernardino City may not describe water from a different supplier or a private well.

A report gives system-level information rather than a measurement from your own tap. If you want an address-specific result, ask a certified drinking-water laboratory about a fluoride test and follow its sampling instructions. Our guide explains how to test water quality at home.

If you want to reduce fluoride, look for a filter independently certified for fluoride reduction. Reverse-osmosis systems certified to NSF/ANSI 58 are one option, but check the individual product’s certified claims. Do not assume every carbon filter or pitcher removes fluoride; review the specifications for the best pitcher water filters before choosing one.

Follow the manufacturer’s installation and replacement instructions. If knowing the concentration after filtering matters to you, a laboratory test of the filtered water can check the result at your tap.

Who can answer questions about fluoride?

Ask a dentist or doctor if you have questions about fluoride.

Where does the data come from?

The city status comes from the CDC’s 2025 fluoridation status report, while the measured concentration comes from the municipal utility’s 2025 water quality report. The utility report identifies the fluoride sampling year as 2023, so the report year and sampling year should not be treated as interchangeable.

The county and state percentages come from the CDC’s 2020 dataset. For the most current information about your service address, check with your own supplier and compare its latest report with these historical figures.

Frequently asked questions

Does the city water report tell me how much fluoride is in a private well?

No. The report describes the city’s public water system, not an individual private well. A well-specific laboratory test can measure its fluoride concentration.

Can boiling water remove fluoride?

No. Boiling does not remove fluoride; as water evaporates, the fluoride remaining in the water can become more concentrated.