Is There Fluoride in Rochester Water?
Yes, fluoride is present: the 2013–2018 mean of detected finished-water samples was about 0.62 mg/L, but whether Rochester’s utility adds fluoride is not reported.
Is fluoride added to Rochester water?
The available measurements show that fluoride was detected in Rochester City’s finished water. They do not establish whether the fluoride occurred naturally, was added by the utility, or came from both sources. Naturally occurring fluoride is not the same thing as fluoridation, which means adding fluoride to a water supply.
The result also describes a historical sampling period, not necessarily what is in your tap water today. For comparisons with other communities, see fluoride in tap water by city.
How much fluoride was measured in Rochester water?
The EPA’s historical compliance data include six finished-water samples from Rochester City, five of which had detectable fluoride. The mean below is calculated from the detected samples; it is not an average that includes the non-detect.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Rochester detected-sample mean | 0.62 mg/L | Mean of detected finished-water compliance samples, 2013–2018 |
| Rochester maximum | 0.82 mg/L | Highest finished-water compliance sample, 2013–2018 |
| US Public Health Service recommended level | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Federal secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
The detected-sample mean was below the recommended level, while the highest sample was above it. Both were below the EPA standards. The recommendation is not the same as the EPA’s enforceable maximum, and a historical sample above the recommendation does not by itself establish a violation.
These figures describe finished water sampled for compliance, not a separate measurement at every home. A newer utility report or a test of your own water can give you information closer to your current situation.
What do county and state figures show?
Rochester is in Monroe County, but a countywide fluoridation percentage is not reported in the available data. The Rochester City results should not be treated as measurements for every water supplier or household in the county.
For New York State, the CDC reported that 71.5% of the population served by public water systems received fluoridated water in 2020. That is a statewide population statistic, not a fluoride concentration. It cannot tell you whether a particular Rochester address receives water with added fluoride.
What is New York’s fluoride law or policy?
The available information does not state a New York law or policy governing fluoride addition. It also does not identify a local requirement or policy for Rochester City.
A recommended concentration, a measured concentration and a requirement to add fluoride are different kinds of information. Neither the statewide percentage nor the historical Rochester measurements establish what rule, if any, applies to a particular supplier. Ask your water supplier or the relevant state or local authority if you need the current policy.
How can you check your water or remove fluoride?
Identify your supplier
Check your water bill or ask your building manager which public water system serves your address. If you use a private well, Rochester City’s public-water results do not describe your well water.
Check a report or test a sample
Look for fluoride in your supplier’s latest drinking-water quality report, and check the sampling year and whether the reported figure is an average, a range or a maximum. You can also ask the supplier whether it adds fluoride and what its most recent monitoring shows.
For a measurement at your tap, ask an accredited laboratory about a fluoride test and follow its container and sampling instructions. Our guide to how to test water quality at home explains how to approach testing.
Choose a filter for fluoride
Reverse osmosis and distillation can reduce fluoride. Some filters made with specialized media can also reduce it, but an ordinary activated-carbon pitcher should not be assumed to do so.
Look for independent certification specifically for fluoride reduction, and follow the manufacturer’s maintenance and replacement instructions. When comparing the best pitcher water filters, check the individual model’s certification rather than assuming every pitcher removes fluoride.
Who should ask for advice?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Rochester fluoride data come from?
The EPA Six-Year Review 4 compliance monitoring data identify Rochester City as public water system NY2704518. The historical fluoride record covers six finished-water samples from 2013–2018, including five detections. It does not report whether the utility added the fluoride.
The CDC community water fluoridation dataset supplies the 2020 New York percentage. It describes the share of the public-water-system population receiving fluoridated water; it is not a current tap-water test for Rochester.
Frequently asked questions
Does boiling Rochester tap water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Can a fluoride test show whether the fluoride was added?
A concentration result alone does not establish whether fluoride was added or occurred naturally. Ask the water supplier about its current practice.
Does a refrigerator water filter necessarily remove fluoride?
No. Check the specific filter’s independent certification or performance information for fluoride reduction.