Is There Fluoride in Riverside Water?
Yes — the utility adds fluoride; about 0.45 mg/L (2025). However, the utility’s own report says its fluoride is naturally occurring and that Riverside is not planning to add fluoride artificially, so the added-fluoride conclusion needs clarification.
For comparisons with other systems, see fluoride in tap water by city.
Does Riverside add fluoride to its water?
The 2025 Riverside water quality report describes naturally occurring fluoride and says Riverside is not planning to add fluoride to its water by artificial means. Naturally occurring fluoride is not the same as fluoride added by a utility.
The CDC’s 2025 My Water’s Fluoride listing identifies Riverside, City Of as fluoridated and gives its status as “Consecutive.” That classification alone does not establish which supplier, if any, adds fluoride. The utility’s statement and CDC classification do not resolve whether fluoride is added anywhere in the supply serving a particular address.
If that distinction matters to you, ask Riverside Public Utilities to clarify its current practices and the source of water at your address. The fluoride concentration and whether fluoride is added are separate questions.
How much fluoride is in Riverside water?
The utility’s 2025 report gives an average and a range for fluoride. These results can be compared with national reference levels, although the references have different purposes.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Riverside reported average, 2025 | 0.45 mg/L | Average in the utility’s water quality report |
| Riverside reported range, 2025 | 0.39–0.53 mg/L | Range in the utility’s water quality report |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Secondary drinking-water standard |
| EPA limit | 4.0 mg/L | Maximum contaminant level |
The 2025 reported average and range were below all three reference levels. The 0.7 mg/L recommendation applies to community water fluoridation; it is not a measurement of Riverside water or an indication that Riverside adds fluoride.
The utility’s reported figures describe its water quality results, not a separate test of every household tap. A test of your own water is the way to find out what a sample from your tap contains.
How does Riverside compare with the county and state?
According to CDC county and state data, 51.1% of the population served by public water systems in Riverside County received fluoridated water in 2020. The corresponding California figure was 57.5% in 2020.
Those percentages describe populations served by public water systems, not all residents of the county or state. They also cover larger areas than the Riverside utility’s service area and describe a different year from the utility’s 2025 report.
The county and state figures are not fluoride concentration measurements. They cannot tell you the level at your tap or establish whether Riverside’s utility adds fluoride.
What are the state law and policy for Riverside?
The sources cited here do not establish a specific California policy governing whether Riverside adds fluoride. Neither the county and state percentages nor the CDC system classification establishes an obligation for Riverside to add it.
For current rules and how they apply to your address, contact Riverside Public Utilities or California’s drinking-water regulator. The utility’s statement about its own water should not be treated as a complete summary of state law.
How can you check or remove fluoride at home?
First, confirm the name of your water provider on your bill. If Riverside Public Utilities serves your address, ask for its latest fluoride results and whether the water reaching you differs from the supply described in the 2025 report. If another provider serves you, request that provider’s water quality report instead.
For an individual result, use an accredited laboratory that tests drinking water for fluoride and follow its sampling instructions. Ask the laboratory how to collect and submit the sample before taking it. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, reverse osmosis and distillation can do so, as can some filters using activated alumina. Choose a product independently certified for fluoride reduction, check its maintenance instructions, and replace components as directed. Certification for general filtration does not necessarily mean a product reduces fluoride.
Not every pitcher filter is designed to reduce fluoride; check the specific product’s certification and claims in our guide to the best pitcher water filters. You can test water before and after treatment to check the result at your tap. Boiling water is not a fluoride-removal method and can concentrate fluoride as water evaporates.
Who should ask about fluoride?
Anyone with questions about fluoride in their drinking water can ask a dentist or doctor.
Where do the Riverside fluoride data come from?
The utility’s 2025 water quality report is the source for Riverside’s reported average, range and statement about naturally occurring fluoride. The CDC’s 2025 system listing is the source for the fluoridated and “Consecutive” classifications.
The CDC’s 2020 county and state dataset supplies the population percentages. Because the sources describe different measures and years, use the utility report or a current tap test for a concentration—not the county or state percentage. Contact the utility for clarification of the differing descriptions of fluoride in the supply.
Frequently asked questions
Is mg/L the same as parts per million in water?
For dilute solutions such as drinking water, 1 mg/L is approximately 1 part per million.
Does letting Riverside tap water sit remove fluoride?
No. Letting water stand is not a reliable way to remove dissolved fluoride.