Is There Fluoride in Raleigh Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, the utility adds fluoride; its reported 2024 operational mean was about 0.09 mg/L. Raleigh is listed as a fluoridated system with an adjusted fluoride level, rather than a system described as having only naturally occurring fluoride.

For comparisons with other utilities, see fluoride in tap water by city.

Does Raleigh add fluoride to its water?

Yes. The CDC’s 2025 fluoridation status report lists CITY OF RALEIGH, system ID NC0392010, as fluoridated and describes its status as “Adjusted.” That designation indicates added fluoride, not merely fluoride occurring naturally in the source water.

The status report and the measured level answer different questions: one identifies the system’s fluoridation status, while the other describes reported concentrations. The 2025 designation does not tell you the concentration at a particular tap today.

How much fluoride was measured in Raleigh water?

The CDC’s 2024 monthly fluoride report lists 17 monthly values across two rows for Raleigh. Their mean was about 0.09 mg/L. The table compares that operational mean with the federal levels commonly used for reference.

Measure or standardFluoride levelBasis
Raleigh operational meanAbout 0.09 mg/LMean of 17 reported monthly values in 2024
Raleigh reported monthly range0.0–0.58 mg/LLowest and highest monthly values reported in 2024
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable drinking-water limit

The 2024 operational mean was below all three reference levels. It is not a current tap reading, and this comparison is not a regulatory compliance calculation.

Of the 17 values reported for 2024, 15 were below 0.2 mg/L. The yearly mean therefore understates the level in months when fluoride was fed. The two report rows should not be mistaken for 17 distinct calendar months.

How does Raleigh compare with Wake County and North Carolina?

In CDC’s 2020 state and county data, 91.8% of Wake County’s public-water-system population received fluoridated water. The corresponding figure for North Carolina was 87.9% in 2020.

These are coverage figures, not measurements of fluoride concentration. They describe the share of people served by public water systems receiving fluoridated water; they do not say that every tap in Wake County or North Carolina was fluoridated. They also do not describe private wells.

The county and state figures come from a different year and geographic scope than Raleigh’s reported 2024 operational mean. They help put the utility’s status in context but cannot determine the fluoride level at an individual address.

What are the state law and policy on fluoride?

The available records do not specify North Carolina’s fluoride policy. Raleigh’s adjusted status alone does not establish whether state law requires fluoridation or what rules apply to other water systems.

The federal figures in the table also serve different purposes. The 0.7 mg/L US Public Health Service figure is a recommendation for community water fluoridation, while EPA’s 2.0 mg/L secondary standard and 4.0 mg/L maximum contaminant level are separate standards. None, by itself, identifies Raleigh’s current operating level.

How can you check or remove fluoride at your tap?

First, confirm which utility serves your address. A Raleigh mailing address does not by itself establish your water supplier; your bill, landlord or property manager can help identify it. If Raleigh is your supplier, use system ID NC0392010 when checking reports.

Ask the utility for its latest water-quality report or recent fluoride information. Check the reporting period and whether a number is an average, a range or a single result. For an address-specific measurement, consider a drinking-water laboratory that tests for fluoride and follow its sample-collection instructions. Our guide explains how to test water quality at home.

If you want to reduce fluoride, choose a treatment product with independent certification specifically for fluoride reduction. Some reverse-osmosis systems can reduce fluoride, but certification and performance depend on the model and its installation and maintenance. Not every pitcher filter is designed to reduce fluoride; check the product’s claims and certification before buying. See our guide to the best pitcher water filters.

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where do the Raleigh fluoride figures come from?

The Raleigh status comes from CDC’s 2025 My Water’s Fluoride status report. The concentration figures come from its 2024 monthly operational report for the same system ID. The Wake County and North Carolina coverage percentages come from CDC’s 2020 community water fluoridation data.

Those sources describe different things: system status, reported operational levels and population coverage. Their dates matter, so none should be treated as a live measurement of the water at your tap. For the most recent local information, check with your water supplier.

Frequently asked questions

Why are there 17 reported monthly values for one year?

The CDC report lists 17 monthly values across two rows for Raleigh in 2024. That does not mean there were 17 distinct calendar months, and the report summary does not explain the two rows.

Is 0.09 mg/L the same as 0.09 parts per million?

For dilute substances in water, 0.09 mg/L is approximately 0.09 parts per million.

Does boiling Raleigh water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can concentrate it in the remaining water.