Is There Fluoride in Portland Water?

DetoxWater Editorial Team•Published November 5, 2026

No fluoride is added to Portland’s public water; the fluoride present is natural, with a mean of 0.15 mg/L in detected finished-water compliance samples from 2013–2019.

Does Portland add fluoride to its water?

No. The CDC’s water system listing identifies PORTLAND BUREAU OF WATER WORKS, system OR4100657, as not fluoridated. The listing has no data year and was accessed on November 3, 2026.

Natural fluoride and added fluoride are different: a water system can have a measurable amount of naturally occurring fluoride without adding it. For comparisons with other locations, see fluoride in tap water by city.

How much fluoride was measured in Portland water?

The EPA’s Six-Year Review 4 compliance monitoring data include 13 finished-water samples for Portland’s system from 2013–2019. Fluoride was detected in six of those samples. The mean below is based on the detected results, not an average that treats the other samples as zero.

Measure or standardFluoride levelBasis
Portland detected-sample mean0.15 mg/LMean of detected finished-water compliance samples, 2013–2019
Portland sample maximum0.18 mg/LHighest of 13 finished-water compliance samples, 2013–2019
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNon-enforceable secondary drinking-water standard
EPA limit4.0 mg/LEnforceable maximum contaminant level

Both historical Portland figures are below the three comparison levels. The 0.7 mg/L figure is a recommendation for community water fluoridation, not a maximum allowable concentration; the EPA limit and secondary standard have different roles.

These measurements describe samples collected during 2013–2019. They do not establish the fluoride concentration at every Portland tap today, and the sample maximum is not the result for every sample.

How does Portland compare with Multnomah County and Oregon?

In 2020, the CDC’s state and county fluoridation data reported that 0.0% of Multnomah County’s public-water-system population received fluoridated water. The corresponding figure for Oregon was 26.4%.

Those percentages describe populations served by public water systems, not all residents or a measurement at a particular address. They are county and state context for 2020, rather than a current status report for every water system. Portland’s own system listing is a separate source.

What is Oregon’s law or policy on water fluoridation?

The sources cited here do not establish Oregon’s current statewide law or policy on fluoridation. Portland’s system being listed as not fluoridated does not, by itself, establish what rules apply to other Oregon suppliers.

To check the policy relevant to an address, ask the water supplier or the appropriate Oregon state agency. If the address is served by a different system, its status should be checked separately rather than assumed from Portland’s listing.

How can you check your water or remove fluoride?

Start by identifying your water supplier. A water bill or the supplier’s annual water-quality report can help you confirm whether the address is served by Portland’s system or another provider. Ask the supplier for its latest fluoride results and the period those results cover.

For an address-specific result, arrange a fluoride test through an accredited drinking-water laboratory and follow its sampling instructions. A lab result describes the sample you submit; it should not be treated as a measurement for every tap or every day. Our guide to how to test water quality at home explains how to approach home testing.

If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Some reverse-osmosis systems and other filters have that specific certification, but a general filter certification does not mean the product removes fluoride. Check the model’s performance information and follow its maintenance and replacement instructions.

Pitchers vary in what they are certified to reduce. Compare the specific claims in our guide to the best pitcher water filters before choosing one for fluoride.

Who should ask a professional?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where do these figures come from?

The city’s added-fluoride status comes from the CDC’s water system list, while the measured concentration figures come from the EPA’s historical finished-water compliance data. The county and Oregon percentages come from a separate CDC dataset for 2020.

The sources answer different questions: the CDC system listing describes fluoridation status, the EPA records show measured sample results, and the county and state figures describe populations receiving fluoridated water. Check the latest supplier report or test your own water if you need information for a particular address.

Frequently asked questions

Does boiling Portland water remove fluoride?

No. Boiling is not a fluoride-removal method and can concentrate fluoride as water evaporates.

Does a fluoride non-detect mean there was no fluoride in the sample?

Not necessarily. A non-detect means fluoride was not detected at the test’s reporting limit; it does not establish a concentration of zero.