Is There Fluoride in Pittsburgh Water?
Yes, Pittsburgh Water & Sewer Authority adds fluoride; its finished-water compliance samples had a measured mean of 0.82 mg/L from 2012–2019.
Is fluoride added to Pittsburgh water?
The CDC lists Pittsburgh Water & Sewer Authority as fluoridated in its My Water’s Fluoride system list. The listing identifies the system as PA5020038 but does not show a data year for its status.
This is added fluoride, not simply naturally occurring fluoride detected in the water. For comparisons with other systems, see fluoride in tap water by city.
Check the supplier named on your water bill before applying this answer to your home. A Pittsburgh mailing address alone does not establish which public water system serves a property.
How much fluoride was measured in Pittsburgh water?
In the EPA’s 2012–2019 compliance monitoring data, all 13 finished-water samples for the Pittsburgh Water & Sewer Authority system had detectable fluoride. The table compares those historical results with national reference levels.
| Measurement or reference | Fluoride level |
|---|---|
| Pittsburgh mean of detected finished-water compliance samples, 2012–2019 | 0.82 mg/L |
| Pittsburgh maximum among those finished-water compliance samples, 2012–2019 | 1.0 mg/L |
| US Public Health Service recommended level for community water fluoridation | 0.7 mg/L |
| EPA secondary standard | 2.0 mg/L |
| EPA maximum contaminant level | 4.0 mg/L |
The 2012–2019 mean was above the recommended community fluoridation level and below both EPA standards. The EPA maximum contaminant level is enforceable; the EPA secondary standard is a non-enforceable federal guideline.
The mean and maximum describe the samples in that historical dataset. They do not establish the fluoride concentration at a particular Pittsburgh tap today, and they should not be treated as a current reading.
How does Pittsburgh compare with its county and Pennsylvania?
The CDC’s state and county fluoridation data report that 60.0% of Pennsylvania’s public water system population received fluoridated water in 2020. That percentage describes people served by public systems; it is not a fluoride concentration or a percentage of every Pennsylvania resident.
A county-level percentage is not available in the data used here. The Pennsylvania figure does not establish the status of every system in Pittsburgh’s county, so check the specific supplier for an individual address.
What is Pennsylvania’s fluoridation policy?
The available data do not establish whether Pennsylvania requires, permits or restricts fluoridation under state law. They also do not describe the policy decisions behind Pittsburgh Water & Sewer Authority’s listing.
For current requirements, ask the Pennsylvania Department of Environmental Protection. For decisions about a specific supply, contact the water system directly. A system’s reported fluoridation status is not, by itself, an explanation of the state law or local policy governing it.
How can you check or remove fluoride from your water?
Start by identifying your water supplier on your bill or asking your landlord or property manager. Then request the supplier’s latest drinking water quality report and look for the fluoride result, its units and the sampling year. A newer report can help you assess the supply now, rather than relying on the 2012–2019 results.
For a result from your own tap, contact a certified drinking-water laboratory and request a fluoride test. Follow its instructions for collecting and submitting the sample. Our guide to how to test water quality at home explains the process.
If you want to reduce fluoride, look for a treatment device independently certified for fluoride reduction. Reverse osmosis systems are one option, but not every filter or pitcher removes fluoride. Check the certification for the exact model and claim, then follow the manufacturer’s installation and filter-replacement instructions.
Our guide to the best pitcher water filters can help you compare pitchers; verify any model’s fluoride-reduction certification before buying. Boiling is not a fluoride-removal method.
Who should you ask about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Pittsburgh fluoride data come from?
The CDC’s My Water’s Fluoride listing supplies the fluoridation status and system identification; the listing showed no data year when retrieved on November 3, 2026. The EPA’s Six-Year Review 4 dataset supplies the 2012–2019 finished-water sample results.
The CDC state dataset supplies the 2020 Pennsylvania public water system population percentage. These sources answer different questions: whether a system is listed as fluoridated, what was measured in historical samples, and what share of a state population received fluoridated water.
Frequently asked questions
Is mg/L the same as ppm for fluoride in drinking water?
For dilute drinking water, mg/L is approximately equivalent to parts per million, or ppm.
Does freezing tap water remove fluoride?
Freezing water is not a reliable fluoride-removal method. Use a device certified specifically for fluoride reduction if you want to reduce it.