Is There Fluoride in Philadelphia Water?
Yes, the Philadelphia Water Department adds fluoride, and its detected finished-water compliance samples averaged 0.7 mg/L during 2012–2019.
Is Philadelphia water fluoridated?
The CDC lists the Philadelphia Water Department, system ID PA1510001, as fluoridated. That means the answer concerns added fluoride, not just fluoride that occurs naturally in a water source. The CDC listing does not show a data year, so it does not establish a current measured concentration.
The listing applies to the Philadelphia Water Department system. An address in Philadelphia may have a different water source, so check your supplier if you are unsure. For other locations, see fluoride in tap water by city.
How much fluoride has been measured in Philadelphia water?
EPA compliance data include 24 finished-water samples from the Philadelphia Water Department for 2012–2019. Fluoride was detected in all 24 samples. Finished water is water sampled after treatment; these results are not measurements from an individual home tap.
| Measure | Level | Year and basis |
|---|---|---|
| Mean | 0.7 mg/L | 2012–2019; mean of detected finished-water compliance samples |
| Highest sample | 0.78 mg/L | 2012–2019; highest of 24 finished-water compliance samples |
Those historical results can be compared with three federal reference levels:
| Federal reference | Level | What it is |
|---|---|---|
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable drinking-water limit |
The 2012–2019 detected-sample mean matched the recommended level, and the highest finished-water sample from that period was below both EPA standards. The recommendation and the two EPA standards serve different purposes; the recommendation is not the enforceable limit. None of these historical sample results establishes the concentration at a particular tap today.
How does Philadelphia compare with the county and state?
A separate percentage for Philadelphia County is not available in the figures cited here. The city utility’s fluoridation listing should not be used to calculate a county-wide percentage.
For Pennsylvania, CDC data show that 60.0% of the population served by public water systems received fluoridated water in 2020. That figure describes people served by public water systems, not the percentage of all Pennsylvania residents or the percentage of water systems that were fluoridated. It also does not give the fluoride concentration for an individual household.
What is Pennsylvania’s fluoride law or policy?
The sources cited here do not establish Pennsylvania’s current state law or policy on adding fluoride. The CDC system listing and EPA sample results describe Philadelphia’s water system and historical measurements; they are not, by themselves, a statement of what state law requires.
For a current policy question, ask the Pennsylvania drinking-water authority or the Philadelphia Water Department. For the concentration supplied to your address, ask the utility for its latest water-quality report and any more recent fluoride results.
How can you check your water or remove fluoride?
First, identify your water supplier. Your water bill or building manager may be able to help; a private well or a different public supplier would need its own information. Ask the supplier for its latest report and look for fluoride results, including their sampling dates and whether they represent finished water or another sampling point.
For a result specific to your tap, ask a qualified drinking-water laboratory about a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing.
If you want to reduce fluoride, choose a device with an independently verified fluoride-reduction claim. A reverse-osmosis system certified to NSF/ANSI 58 for fluoride reduction is one option; check the certification for the exact model and replace its components as directed. A filter marketed for taste or chlorine reduction should not be assumed to remove fluoride. See our guide to the best pitcher water filters and check each model’s specific claims.
Who should ask a professional?
Ask a dentist or doctor if you have questions about fluoride in your drinking water.
Where does the data come from?
The CDC My Water’s Fluoride system list identifies the Philadelphia Water Department as fluoridated. The listing was retrieved on November 3, 2026, but does not display a data year.
The EPA Six-Year Review 4 compliance monitoring data contain the Philadelphia finished-water samples from 2012–2019. The mean and maximum above summarize that historical sample set, not a current tap test.
The CDC state and county fluoridation dataset is the source for the 2020 Pennsylvania public-water-system population figure. Its statewide percentage and the Philadelphia sample results measure different things.
Frequently asked questions
Does boiling Philadelphia water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Can you tell whether Philadelphia water contains fluoride by looking at it?
No. Appearance is not a reliable way to determine whether water contains fluoride; a laboratory test can measure it.