Is There Fluoride in Peoria Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, fluoride is present: the mean of detected finished-water samples was 0.27 mg/L in 2012–2019, but whether the utility adds fluoride is not reported.

Does Peoria add fluoride to its water?

The available measurements establish that fluoride was detected in finished water reported for Peoria, Arizona. They do not establish whether the fluoride was naturally present, added by the utility, or a combination of the two.

Naturally occurring fluoride is not the same as fluoridation, which means adding fluoride to a water supply. A detected concentration alone cannot tell you which is the case. For comparisons with other communities, see fluoride in tap water by city.

The measurements are historical, not a current tap-water reading. Ask Peoria’s water utility for its latest report and its current fluoride-addition practice if you need to know what applies now.

How much fluoride was measured in Peoria water?

The EPA’s compliance-monitoring data include 274 finished-water samples for the system identified as PEORIA CITY OF during 2012–2019. Fluoride was detected in 273 of those samples; the mean below is calculated from the detected samples, not all 274 samples.

Measurement or benchmarkFluoride concentrationBasis
Peoria detected-sample mean0.27 mg/LDetected finished-water compliance samples, 2012–2019
Peoria maximum0.78 mg/LHighest finished-water sample, 2012–2019
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LNonenforceable secondary drinking-water standard
EPA maximum contaminant level4.0 mg/LEnforceable primary drinking-water limit

The historical mean was below the Public Health Service recommendation, while the highest individual sample was above it. Both were below the EPA secondary standard and maximum contaminant level.

These figures have different purposes: the Public Health Service number is a recommendation for systems that fluoridate, while the EPA numbers are drinking-water standards. A single historical sample is not, by itself, a determination of regulatory compliance or evidence that Peoria adds fluoride.

What is the county and Arizona context?

In 2020, 57.7% of Arizona residents served by public water systems received fluoridated water, according to the CDC’s state figure. That percentage describes the population served, not the percentage of water systems that fluoridated.

A county-wide percentage is not available for this comparison. The Arizona figure also does not identify Peoria’s practice: a statewide percentage cannot establish whether any particular utility adds fluoride or what comes out of a particular tap.

What are Arizona’s fluoride laws and policies?

The cited data do not establish an Arizona law requiring or prohibiting fluoride addition, or a current fluoridation policy for Peoria. The state population percentage is a reporting statistic, not a statement of what state law requires.

Likewise, the 0.7 mg/L Public Health Service recommendation is not, by itself, a statement of Arizona law. Check current state and local requirements separately, and ask Peoria’s utility about its current practice.

How can you check your water or remove fluoride?

Start with the utility’s latest drinking-water quality report and confirm that it covers your address. Ask for the most recent fluoride results, the sampling dates, and whether fluoride is added. Results from finished water describe the water leaving treatment; they are not a separate measurement from your own tap.

For a tap-specific result, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. If you use a private well, a laboratory test is especially useful because the Peoria public-system results do not establish your well’s fluoride concentration. Our guide explains how to test water quality at home.

If you want to reduce fluoride, look for a reverse-osmosis system certified to NSF/ANSI 58 specifically for fluoride reduction, or another filter with an independently verified fluoride-reduction claim. Do not assume a standard activated-carbon pitcher removes fluoride; check the certification for the exact model and contaminant. Compare the best pitcher water filters and verify each model’s claims before buying.

Install and maintain any filter according to its instructions, including replacing components when required. If you have questions about fluoride in your drinking water or your own exposure, ask a dentist or doctor.

Where does the Peoria fluoride data come from?

The EPA Six-Year Review compliance-monitoring data contain the 2012–2019 finished-water samples for PEORIA CITY OF, system ID AZ0407096. The mean represents detected samples, and the maximum represents the highest individual sample in that historical set.

The CDC community water fluoridation dataset supplies the 2020 Arizona population percentage. Neither historical source establishes Peoria’s current fluoride-addition practice, so the utility is the place to ask for an up-to-date answer.

Frequently asked questions

Does boiling Peoria water remove fluoride?

No. Boiling does not remove fluoride and can concentrate it as water evaporates.

Does a conventional water softener remove fluoride?

A conventional water softener is not designed to remove fluoride. Check the product’s independently verified reduction claims rather than assuming it does.

What does mg/L mean in a fluoride report?

It means milligrams of fluoride per liter of water. In drinking water, 1 mg/L is approximately 1 part per million.