Is There Fluoride in Pennsylvania Water?
Yes, for most residents: 60.0% of people on community water systems received fluoridated water in 2020. That statewide figure does not establish whether fluoride is present in your home’s water or whether a utility adds it. For other locations, see fluoride in tap water by city.
How much of Pennsylvania’s water is fluoridated?
In 2020, 60.0% of people served by Pennsylvania community water systems received fluoridated water. The figure is based on the population served, not the percentage of water systems or the percentage of all Pennsylvania residents.
A community water system serves people at their homes. The statewide figure does not describe individual private wells, and it cannot tell you the status of a particular city, neighborhood or address. It is also a snapshot from 2020, not a current measurement for every system.
Fluoride can occur naturally in water. Finding fluoride in a water sample does not, by itself, establish that a water provider adds it. Likewise, the statewide percentage is not a measurement of the fluoride concentration at your tap.
What is Pennsylvania’s law or policy on fluoridation?
We found no information establishing whether Pennsylvania has a statewide fluoridation mandate or prohibition. The 2020 population figure describes access to fluoridated water; it does not establish the law or policy behind a particular water system’s status.
For a current answer about requirements in your area, ask the Pennsylvania Department of Environmental Protection or your water provider. If you contact a utility, distinguish between asking whether fluoride is present and asking whether the utility adds it: those are separate questions.
The U.S. Public Health Service’s recommended concentration for community water fluoridation is a national recommendation. It does not, on its own, tell you what Pennsylvania requires or what a local utility does.
How can you find out about your city or water utility?
Start by identifying the water provider named on your bill. A city name alone may not be enough: the relevant information is the report for the system that actually supplies your address. If you rent or do not receive a water bill, ask your landlord or property manager which provider serves the building.
Look for the provider’s annual drinking water quality report, often called a Consumer Confidence Report. Search the report for “fluoride” and note the reported concentration, its units and the year of the result. If the report gives a range as well as a typical value, check which result applies to the part of the system serving you.
If the report is unclear or does not answer whether fluoride is added, contact the utility. Ask for its latest fluoride result and sampling year, whether it adds fluoride, and whether it receives water from another system. A national recommendation or statewide percentage is not a substitute for that local result.
If your home uses a private well, a utility report will not describe the water from that well. Arrange a fluoride-specific laboratory test to find its concentration. Our guide to how to test water quality at home explains how to approach water testing.
If you are considering filtration, check the specific product’s certification and claims for fluoride reduction; not every pitcher filter is designed to reduce it. See our guide to the best pitcher water filters and verify the fluoride claim for the model you choose.
What do the fluoride levels mean?
Fluoride concentrations are commonly reported in milligrams per liter (mg/L). Compare a local test result with the appropriate reference below, while keeping in mind that these are three different kinds of benchmarks.
| Reference | Level | What it means |
|---|---|---|
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation; it is not a measurement of your water. |
| EPA secondary standard | 2.0 mg/L | A federally non-enforceable secondary drinking water standard. |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable federal limit for regulated public water systems. |
The EPA public-water limit does not automatically establish the concentration in a private well. A reported value below or above a benchmark must be interpreted using the result’s units, sampling information and the applicable standard. The mere presence of fluoride does not show that a standard has been exceeded.
When should you ask a professional?
If you have questions about fluoride in your water for yourself or your children, ask a dentist or doctor.
Where does the Pennsylvania data come from?
The statewide figure comes from the CDC’s community water fluoridation state and county data, using Water Fluoridation Reporting System information. For Pennsylvania, the figure cited here is the percentage of the community water system population receiving fluoridated water in 2020.
That source provides a statewide population measure, not a fluoride concentration for your household. For a local concentration and its sampling year, use your water provider’s report or a fluoride-specific test of your well. Ask the provider directly if you also want to know whether fluoride is added.
Frequently asked questions
Can you tell whether water contains fluoride by looking at it?
No. Clear water can contain dissolved fluoride. Check a water quality report or use a fluoride-specific test.
Does boiling water remove fluoride?
No. Boiling does not remove dissolved fluoride, and its concentration can increase as water evaporates.