Is There Fluoride in Oregon Water?
Partly: 26.4% of people on Oregon community water systems received fluoridated water in 2020. That statewide figure does not tell you whether fluoride is added to your water or how much is at your tap. For comparisons elsewhere, see fluoride in tap water by city.
How much of Oregon’s water is fluoridated?
In 2020, 26.4% of people served by Oregon community water systems received fluoridated water, according to the CDC’s community water fluoridation data. The percentage is based on the population served by those systems, not all Oregon residents or the number of water systems.
This is a population-coverage figure, not a fluoride concentration. It cannot tell you the fluoride level in a particular water system, home or private well. It also does not establish the current statewide percentage, because the figure is from 2020.
Fluoride can occur naturally in a water source. Natural fluoride is not the same thing as a water system deliberately adding fluoride, so finding fluoride in a sample alone does not establish that the water was fluoridated.
Does Oregon require water fluoridation?
The statewide coverage figure does not establish an Oregon-wide requirement or prohibition on adding fluoride. It also does not establish the policy of any particular city or water provider.
For the policy that applies to your supply, ask your water utility or Oregon’s drinking water program. Distinguish a question about whether a system adds fluoride from a question about whether its finished water contains fluoride: a utility’s answers may address different things.
How can you find the fluoride level in your water?
Start by identifying the water system that serves your address. Your utility can tell you whether it adds fluoride and can direct you to its drinking water quality report, often called a consumer confidence report. If you rent or share a water bill, your landlord or property manager may be able to identify the provider.
When you read the report, look for fluoride in the list of detected substances and note the units. Check the report and sample dates as well as whether the result is an individual measurement, a range or an average. A result for a system is useful context, but it is not necessarily a measurement taken at your own tap.
If the report does not answer your question, ask the utility for its latest fluoride result and what the result represents. Ask separately whether the system adds fluoride and whether any fluoride comes from its source water.
A private well is not covered by a community water system’s report. For a result specific to a well or household tap, ask an accredited drinking water laboratory about fluoride testing, sample collection and interpreting the result. Our guide to how to test water quality at home explains the testing process.
What do the fluoride standards mean?
Fluoride concentrations are commonly reported in milligrams per liter (mg/L). The following reference values serve different purposes; none is a measurement of Oregon water.
| Reference value | What it means |
|---|---|
| 0.7 mg/L | The U.S. Public Health Service’s recommended fluoride level for community water fluoridation. |
| 2.0 mg/L | The EPA’s secondary standard, a non-enforceable federal guideline. |
| 4.0 mg/L | The EPA’s enforceable maximum contaminant level for regulated public drinking water systems. |
Compare a reported result with the appropriate reference value, taking care to check the units and what the sample represents. If you are unsure how to interpret a utility or laboratory result, ask the organization that issued it.
If you are considering filtration, check a product’s certification and specifications for fluoride reduction rather than assuming every filter removes it. See our guide to the best pitcher water filters.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Oregon figure come from?
The Oregon coverage figure comes from CDC’s Water Fluoridation Reporting System, published through its state and county data set. It describes the share of the community water system population receiving fluoridated water in 2020; it does not provide a fluoride measurement for your address.
For a local answer, the most useful next source is your own provider’s current report or a laboratory result for your water. Keep the date and sampling basis with any result you compare, so that a statewide coverage percentage is not mistaken for a measured concentration.
Frequently asked questions
Can my water bill help identify the utility to ask?
Yes. A water bill may name your provider. If you do not receive the bill, ask your landlord or property manager which system serves the property.
Does every pitcher filter remove fluoride?
No. Check the specific pitcher and filter cartridge’s certification and specifications for fluoride reduction.