Is There Fluoride in Oklahoma City Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, Oklahoma City adds fluoride, and its state-reported mean of monthly operational values was about 0.61 mg/L in 2025.

Does Oklahoma City add fluoride to its water?

Oklahoma City’s utility is reported as fluoridated, with a status of “Adjusted.” That means the utility adds fluoride rather than relying only on fluoride that may occur naturally in the water.

The status and concentration figures describe the public water system identified as OKLAHOMA CITY, system ID OK1020902. They do not establish the fluoride level at every individual tap. For comparisons with other systems, see fluoride in tap water by city.

How much fluoride is in Oklahoma City water?

For 2025, the state-reported operational fluoride level averaged 0.61 mg/L across 18 monthly values listed in two reporting rows. The lowest and highest of those monthly values were 0.50 mg/L and 0.72 mg/L, respectively. These are reported monthly values, not the range of individual tap samples; 18 values across two rows does not mean there were 18 months in 2025.

Measure or benchmarkFluoride levelBasis
Oklahoma City reported average0.61 mg/L2025 mean of 18 state-reported monthly operational values across two rows
Oklahoma City reported monthly range0.50–0.72 mg/LLowest and highest of those reported monthly values in 2025
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LFederal secondary drinking water standard
EPA maximum contaminant level4.0 mg/LEnforceable federal drinking water limit

Oklahoma City’s 2025 reported average was below all three benchmarks. The 0.7 mg/L recommendation is not an enforceable maximum, and the 2.0 mg/L secondary standard is not federally enforceable. A comparison with the reported average alone does not determine regulatory compliance.

How does Oklahoma City compare with the county and state?

In 2020, 85.1% of the public water system population in Oklahoma County received fluoridated water. The corresponding figure for Oklahoma was 68.0%.

These percentages describe people served by public water systems, not all residents or the percentage of Oklahoma City customers receiving fluoride. They are also coverage figures, not measurements of fluoride concentration. The county and state figures are from 2020, while Oklahoma City’s reported status and operational levels are from 2025, so they should not be treated as a same-year comparison.

What does Oklahoma law say about water fluoridation?

The cited data do not establish whether Oklahoma law requires or restricts community water fluoridation. Oklahoma City’s “Adjusted” status describes what was reported for the utility in 2025; it does not, by itself, establish a state or local legal requirement.

For current requirements or local decisions, ask the Oklahoma Department of Environmental Quality or the utility serving your address. A utility’s practice and the law governing that practice are separate questions.

How can you check your water or remove fluoride?

First, confirm which public water system serves your address. A city name or ZIP code alone may not identify your supplier. Ask the utility for its latest drinking water quality report and any more recent fluoride monitoring information; the 2025 figures above are not a real-time reading at your tap.

For a result from your own tap, ask an accredited drinking water laboratory for a fluoride test and follow its sampling instructions. A home test may be useful for screening, but check whether it measures fluoride and whether its range is suitable for the concentration you want to check. Our guide explains how to test water quality at home.

If you want to reduce fluoride, look for a filter independently certified for fluoride reduction. Reverse osmosis systems are one option, but not every filter or pitcher removes fluoride. Check the certification and replacement instructions for the specific model, including among the best pitcher water filters.

Testing water before and after the filter can help you check its performance at your tap. Replace filters as directed by the manufacturer.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the information come from?

The CDC Fluoridation Status Report lists Oklahoma City’s system as fluoridated and “Adjusted” for 2025. The CDC Average Fluoride Levels by Month report is the source for the 2025 operational values summarized above.

The CDC community water fluoridation dataset supplies the 2020 Oklahoma County and Oklahoma coverage percentages. Those figures provide context for public water systems; they are not a substitute for current information from the supplier serving your address.

Frequently asked questions

Does boiling Oklahoma City water remove fluoride?

No. Boiling does not remove fluoride and can increase its concentration as water evaporates.

Can water contain natural fluoride when a utility also adds it?

Yes. Fluoride can occur naturally in source water even when a utility adjusts its level. Oklahoma City’s reported status does not specify how much of its fluoride occurs naturally.

Is 0.61 mg/L a real-time fluoride reading?

No. It is the mean of Oklahoma City’s state-reported monthly operational values for 2025, not a live measurement at your tap.