Is There Fluoride in Ohio Water?
Yes, for most residents: 92.7% of people on Ohio community water systems received fluoridated water in 2020. That statewide figure does not establish whether a particular home receives fluoridated water or how much fluoride is in it. For comparisons with other locations, see fluoride in tap water by city.
How much of Ohio’s water is fluoridated?
The CDC’s water fluoridation data indicate that 92.7% of people served by Ohio community water systems received fluoridated water in 2020. The figure describes people served, not the percentage of water systems that fluoridate or the volume of water treated.
It is also a historical statewide figure, not a current result for every city or household. It does not tell a private well owner whether fluoride is present in their well. To find the level in your supply, look for a local report or arrange a test.
Fluoride can occur naturally in water. Natural fluoride is not the same as fluoridation, which involves adjusting fluoride in a community water supply; a fluoride result alone does not tell you whether a utility adds it.
What does Ohio law say about fluoridation?
The statewide percentage does not establish whether Ohio requires, permits or restricts fluoridation. It also does not establish the policy of any particular utility. A population statistic and a legal requirement answer different questions.
For current rules, check Ohio law or contact the Ohio Department of Health. You can also ask your water supplier whether it adds fluoride and which rules apply to its system. Ask about your specific supplier rather than assuming that a statewide figure describes its practice.
How can you find out about your city or utility?
Start by identifying the company or public utility named on your water bill. If you rent or do not receive the bill, ask the property owner or manager which utility serves the building. A city name alone may not be enough to identify the supplier.
Request the utility’s latest consumer confidence report, also called a drinking water quality report. Look for a fluoride entry and note the sampling period, the reported concentration and whether the report gives a single result or a range. If the entry is unclear, ask the utility when the samples were collected and whether it adds fluoride.
A utility report describes results for the water system; it is not necessarily a measurement from your own tap. If you use a private well or want a result for your household, ask a qualified laboratory about a fluoride test and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach household testing.
If you want to reduce fluoride with a pitcher, do not assume that every filter does so. Check the specific product’s certification for fluoride reduction and follow its cartridge replacement instructions. The guide to the best pitcher water filters can help you compare options, but verify the fluoride claim for the model you choose.
What do the fluoride levels mean?
Fluoride concentrations are commonly reported in milligrams per liter, written as mg/L. The following numbers serve different purposes; none is a measurement of an individual Ohio water supply.
| Level | Meaning |
|---|---|
| 0.7 mg/L | US Public Health Service recommended level for community water fluoridation; it is not an enforceable maximum. |
| 2.0 mg/L | EPA secondary standard, which is not federally enforceable. |
| 4.0 mg/L | EPA maximum contaminant level, an enforceable federal limit for public water systems. |
Compare a local result with the appropriate standard, but do not treat a single test result as a determination of regulatory compliance. Ask the utility or regulator how compliance is assessed if a result is above a standard.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the Ohio data come from?
The statewide figure comes from the CDC’s Water Fluoridation Reporting System data available through data.cdc.gov. The figure cited above is for 2020 and represents the share of Ohio’s community water system population receiving fluoridated water.
That source is useful for understanding the statewide reach of fluoridation at that time. It does not replace a utility’s current report or a household test: those are the places to look for a concentration and sampling details relevant to your own water.
Frequently asked questions
Is naturally occurring fluoride the same as added fluoride?
No. Fluoride can occur naturally in a water source, while fluoridation involves adjusting fluoride in a community water supply. Ask your utility whether it adds fluoride.
What does mg/L mean on a water report?
It means milligrams per liter, a unit used to report the concentration of fluoride in water.
Can a water bill identify my supplier?
A water bill generally names the utility billing you. If you do not receive one, ask your property owner or manager which supplier serves the building.