Is There Fluoride in North Dakota Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents, because 96.5% of people on North Dakota community water systems received fluoridated water in 2020. For information about other locations, see fluoride in tap water by city.

How much of North Dakota’s water is fluoridated?

In 2020, 96.5% of people served by community water systems in North Dakota received fluoridated water. That figure describes people served by those systems, not the percentage of all water sources, utilities or North Dakota households.

The statewide percentage is useful context, but it does not establish the fluoride concentration at a particular address. It also does not tell you whether your own water provider adds fluoride. A local report or test is needed to answer those questions.

Does North Dakota require water fluoridation?

The statewide percentage does not establish whether North Dakota has a law requiring community water fluoridation. It also does not establish the policy of a particular city or water utility. Ask your provider about its current practice rather than assuming its policy from the statewide figure.

Fluoride can occur naturally in a water source. Community water fluoridation refers to adjusting the fluoride level in a water supply; natural fluoride is not, by itself, fluoridation. A fluoride concentration in a report does not alone tell you whether fluoride was added.

How can you find the fluoride level for your city or utility?

Start with the water provider named on your bill, or ask your landlord which system serves your home. Look for the provider’s annual drinking water quality report, often called a Consumer Confidence Report, and check whether it lists a fluoride result in milligrams per liter (mg/L).

Check the sampling date as well as the report’s publication date. If the report lists a range or an average, note which kind of result it gives. The utility can explain which source or service area the result represents and whether it has a more recent measurement.

To find out whether fluoride is added, ask the provider directly about its current treatment practice. You can also ask whether fluoride occurs naturally in its source water. A statewide percentage cannot answer either question for an individual system.

If your home uses a private well, the community water system percentage does not describe your well. Contact a laboratory that tests drinking water for fluoride and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing.

A general water test does not necessarily measure fluoride, so check the test’s included substances before ordering it. If you are considering treatment, check that the specific filter and replacement cartridge are certified for fluoride reduction; not every pitcher filter is designed for it. See our guide to the best pitcher water filters.

What do the fluoride levels and standards mean?

These figures serve different purposes and should not be treated as interchangeable:

LevelMeaning
0.7 mg/LUS Public Health Service recommended level for community water fluoridation.
2.0 mg/LEPA secondary standard for fluoride; it is not federally enforceable.
4.0 mg/LEPA’s enforceable maximum contaminant level for fluoride in public water systems.

The 0.7 mg/L recommendation guides community water fluoridation; it is not the EPA maximum contaminant level. The EPA standards apply to public water systems, not as direct measurements of a private well.

No measured fluoride concentration for a specific North Dakota utility is reported here. You need a result from your utility or a test of your water before comparing your local level with these figures.

Where does the North Dakota data come from?

The 2020 statewide percentage comes from the CDC’s community water fluoridation data, which draws on the Water Fluoridation Reporting System. Its population-based figure is a snapshot for 2020, not a current measurement from every tap.

A utility report and a private-well test answer a more local question: how much fluoride was measured in the water represented by a particular sample or report. Keep the date, units and source of any result with the number when comparing it with a standard.

Who should ask a dentist or doctor?

Anyone with questions about fluoride in their drinking water should ask a dentist or doctor.

Frequently asked questions

Can a fluoride test show whether fluoride was added?

A concentration alone cannot establish whether fluoride was added or occurred naturally. Ask the water provider about its treatment and source water.

Do all pitcher water filters reduce fluoride?

No. Check whether the specific pitcher and replacement cartridge are certified for fluoride reduction.

Can one water sample represent every home in a city?

Not necessarily. Ask the utility what source or service area its reported result represents.