Is There Fluoride in North Carolina Water?
Yes, for most residents: 87.9% of people on North Carolina community water systems received fluoridated water in 2020. That statewide figure does not establish the fluoride status or concentration at a particular address. For comparisons beyond North Carolina, see fluoride in tap water by city.
How much of North Carolina’s water is fluoridated?
In 2020, 87.9% of the population served by North Carolina community water systems received fluoridated water, according to CDC data. The percentage describes people served by those systems, not the proportion of every water source in the state.
It is also not a measurement of the fluoride concentration at your tap. A statewide population figure cannot tell you whether your own utility adds fluoride, whether fluoride occurs naturally in your source, or what a particular sample contains.
Fluoride can occur naturally in water. Finding fluoride in a sample does not, by itself, establish that a utility has added it as part of a fluoridation program.
Does North Carolina law require water fluoridation?
The CDC population figure does not establish whether North Carolina law requires, permits or prohibits utilities from adding fluoride. It should not be used as a substitute for a current statement of state law or local policy.
For the current rules, ask the North Carolina drinking water agency or your utility. Ask separately about the law and about your utility’s actual practice: a general policy question and the status of a particular water supply are not the same question.
How can you find out about your city or utility?
Start by identifying the utility that serves your address. Its name may appear on your water bill; if you rent or do not receive a bill, ask your landlord or building manager. A city name alone may not be enough to identify the water supplier.
Look for the utility’s annual drinking water quality report, sometimes called a consumer confidence report. Search the report for “fluoride” and check the sample year, the reported unit and any explanation of whether the fluoride is naturally present or added. If the report is unclear, contact the utility and ask whether it adds fluoride and what level it has reported.
If your home uses a private well, a community water system report does not tell you what is in that well. A laboratory test of a sample from your well can provide a result for fluoride. Our guide to how to test water quality at home explains ways to approach testing.
If you are considering a filter, check whether its certification or manufacturer’s information specifically addresses fluoride reduction; not every filter is designed for it. See our guide to the best pitcher water filters when comparing options.
What do the fluoride levels and standards mean?
Fluoride concentrations are commonly reported in milligrams per liter, written as mg/L. These three figures serve different purposes, so they should not be treated as interchangeable:
| Level | What it represents |
|---|---|
| 0.7 mg/L | The U.S. Public Health Service’s recommended level for community water fluoridation. It is not the federal maximum. |
| 2.0 mg/L | The EPA’s secondary drinking water standard for fluoride. Secondary standards are not federally enforceable limits. |
| 4.0 mg/L | The EPA’s maximum contaminant level for fluoride, an enforceable federal limit for public water systems. |
Compare a utility’s reported result with the appropriate figure, and check the report’s sample year and description before drawing conclusions. The statewide percentage from 2020 is not a concentration and cannot be compared directly with these mg/L values.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the North Carolina data come from?
The statewide percentage comes from the CDC’s community water fluoridation state and county dataset, which draws on the Water Fluoridation Reporting System. The North Carolina figure cited here describes the community water system population in 2020.
That source is useful for the statewide picture, but it does not replace a current local report. For an address-specific answer, use the report from the system serving your home or, for a private well, a test of your own water.
Frequently asked questions
Does boiling water remove fluoride?
Boiling does not reliably remove fluoride. As water evaporates, the fluoride concentration in the remaining water can increase.
Can two addresses in the same city have different water providers?
Yes. Check the provider serving your address rather than assuming every address in a city receives water from the same system.
What does mg/L mean on a water report?
It means milligrams per liter, a unit used to report the concentration of a substance in water.