Is There Fluoride in New York Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 71.5% of people on New York community water systems received fluoridated water in 2020. That statewide figure does not establish the concentration in your own water; for other locations, see fluoride in tap water by city.

How much of New York’s water is fluoridated?

In 2020, 71.5% of people served by New York community water systems received fluoridated water, according to CDC community water fluoridation data. The percentage describes people served by those systems, not the percentage of water samples, utilities or cities that contain fluoride.

The figure is a statewide snapshot for 2020, not a current reading from every New York tap. It does not tell you the level at a particular address or whether a particular utility adds fluoride. It also does not describe water from private wells, which are outside the community water system population used for this figure.

Fluoride can occur naturally in water. Naturally occurring fluoride is not the same thing as a utility adding fluoride, so a test showing fluoride alone does not establish that the water was fluoridated by the supplier.

What is New York’s law or policy on fluoridation?

The statewide percentage does not establish New York’s current law or policy on adding fluoride. It also does not establish whether a statewide mandate applies. Check current state drinking-water rules or ask your water supplier if you need to know what requirements apply to a particular system.

A policy and a water test answer different questions. A policy describes what a supplier is required or permitted to do; a test reports what was found in a sample. Because fluoride can occur naturally, ask the supplier about its treatment practices rather than assuming that a measured level means fluoride was added.

How can you find your city’s or utility’s fluoride level?

Start with the name of the water supplier on your bill, or ask your building manager if you do not receive the bill directly. Request the supplier’s latest drinking-water quality report and look for fluoride in the results. You can also ask the utility directly whether it adds fluoride and what concentration it has measured.

When reviewing a result, note the sampling year, the units and what the number represents. A reported average, a range and a single sample are different kinds of measurements. A utility report generally describes the water system’s monitoring rather than a separate measurement from every household tap.

If you use a private well, the community water system percentage cannot tell you what is in your water. For options on checking a specific supply, see how to test water quality at home. Ask a testing laboratory which test measures fluoride and how to collect the sample.

If your water passes through a filter, distinguish a sample taken before the filter from one taken after it. Not every pitcher filter is designed to reduce fluoride; check a product’s specific fluoride-reduction certification when comparing the best pitcher water filters.

What do the fluoride standards mean?

Compare a local result in milligrams per liter (mg/L) with the appropriate benchmark. These numbers serve different purposes and should not be treated as interchangeable.

BenchmarkLevelWhat it represents
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LA non-enforceable federal secondary standard
EPA maximum contaminant level4.0 mg/LAn enforceable federal limit for public water systems

The 0.7 mg/L recommendation is not the same as the 4.0 mg/L limit. A local result should be read with its sampling date and basis, rather than compared with a statewide population percentage.

Who should ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the New York data come from?

The statewide figure comes from the CDC’s Water Fluoridation Reporting System data published on data.cdc.gov. Its basis is the share of the New York community water system population receiving fluoridated water in 2020; it is not a statewide measurement in mg/L.

For a decision about a particular address, use the statewide figure as context and seek a report or test for that water supply. Check the report’s year and sampling details, and ask the supplier when its current practices or more recent results are unclear.

Frequently asked questions

Does boiling New York water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can increase its concentration in the remaining water.

Can you tell whether water contains fluoride by tasting it?

Taste is not a reliable way to determine whether water contains fluoride. Use a water quality report or a fluoride test instead.