Is There Fluoride in New York City Water?
Yes, New York City’s water utility adds fluoride, and its 2025 report measured an average of 0.7 mg/L.
Does New York City add fluoride to its water?
New York City adds fluoride to its drinking water. The 2025 New York City Drinking Water Supply and Quality Report says it is added at a concentration of 0.7 mg/L as directed by the New York City Department of Health and Mental Hygiene.
That is an added-fluoride program, not merely a report of fluoride occurring naturally in water. For comparisons with other utilities, see fluoride in tap water by city.
How much fluoride is in New York City water?
The utility’s 2025 report lists a measured average of 0.7 mg/L and a measured range from not detected to 0.8 mg/L. The average describes the reported results collectively; it does not mean every sample had the same concentration.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| New York City average | 0.7 mg/L | Measured average reported for 2025 |
| New York City range | Not detected to 0.8 mg/L | Measured range reported for 2025 |
| U.S. Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The 2025 measured average matches the U.S. Public Health Service recommendation. Both that average and the reported upper end of the 2025 range are below the EPA secondary standard and maximum contaminant level.
These numbers have different roles: the city figures are measurements, the Public Health Service figure is a recommendation, and the EPA figures are drinking-water standards. The citywide average is useful for comparison, but a test of water from your own tap can give you a result for that sample.
What is the county and New York state context?
New York City covers five counties: New York, Kings, Queens, Bronx and Richmond. A county-level percentage of people receiving fluoridated water is not available here, so the citywide result should not be presented as a separate percentage for each county.
At the state level, CDC fluoridation data for New York report that 71.5% of the population served by public water systems received fluoridated water in 2020. That figure covers New York state public-water-system populations; it is not a New York City measurement or a percentage for every state resident.
What do New York law and policy say about fluoride?
New York City’s report identifies a city health department direction to add fluoride. It describes the city utility’s practice, but does not by itself establish whether a statewide law requires other water systems to add fluoride.
We found no information establishing a statewide fluoridation policy in the sources used for this comparison. For another New York water system, check that utility’s current report rather than assuming its practice matches New York City’s.
How can you check your water or remove fluoride?
Start with the annual water quality report for the utility that supplies your address. If your home uses a different utility or a private well, New York City’s report may not describe your water. The utility name on a water bill can help identify which report to look for.
For a result at your tap, ask a laboratory whether it tests drinking water for fluoride and follow its sampling instructions. Check that the result is reported in mg/L so you can compare it with the figures above. Our guide to how to test water quality at home explains ways to check your water.
If you want to reduce fluoride, reverse osmosis and distillation can do so. Some filters also use media designed for fluoride reduction, but not every pitcher or activated-carbon filter removes fluoride. Before buying, look for independent certification for fluoride reduction and confirm that fluoride is listed for the exact model; our guide to the best pitcher water filters covers pitcher options.
Follow the manufacturer’s replacement instructions, and consider testing both unfiltered and filtered water if you want to check the result at home. Boiling is not a fluoride-removal method: as water evaporates, fluoride can become more concentrated.
Who should ask for advice?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the data come from?
The city figures come from New York City’s 2025 drinking water supply and quality report. Its fluoride row supplies the measured average and range, while the report’s accompanying statement describes the addition of fluoride.
The statewide percentage comes from CDC’s Water Fluoridation Reporting System data for 2020. Because the city measurement and state percentage describe different things and different years, they should not be treated as directly comparable results.
Frequently asked questions
What does mg/L mean in a water report?
It means milligrams per liter, a unit used to report the concentration of a substance in water.
Does “not detected” mean a sample contained no fluoride?
Not necessarily. It means fluoride was not detected by the test; it does not establish that the concentration was exactly zero.