Is There Fluoride in New Jersey Water?
Mostly no: 16.1% of people on community water systems in New Jersey received fluoridated water in 2020. That figure describes community water fluoridation, not the fluoride concentration at your own tap. For comparisons elsewhere, see fluoride in tap water by city.
How much of New Jersey’s water is fluoridated?
In 2020, 16.1% of New Jersey’s community water system population received fluoridated water, according to CDC reporting. The figure is a population measure: It describes people served, not the percentage of utilities or municipalities that fluoridate their water.
It also does not describe every resident’s water source. People using private wells are not represented by a percentage based on community water system customers. The statewide figure cannot tell you whether your particular supplier fluoridates its water or how much fluoride is at your tap.
Fluoride can occur naturally in water. Detecting fluoride is therefore not, by itself, evidence that a utility adds it.
Does New Jersey require water fluoridation?
We found no verified statewide policy information establishing whether New Jersey requires or prohibits community water fluoridation. The 2020 population percentage alone does not establish what state law requires or what any individual utility does.
For a question about a particular supply, ask your water utility whether it adds fluoride and whether fluoride is present naturally in its source water. If you need to know which rules apply to your supply, ask the utility or the appropriate state or local drinking-water authority rather than drawing a conclusion from the statewide percentage.
How can you check fluoride in your city or utility’s water?
Start by identifying the utility that serves your address. Its name may appear on your water bill; if you do not receive the bill yourself, ask your landlord, property manager or local water department. A city name or ZIP code alone may not be enough to identify the supplier for a particular address.
Look for the utility’s annual drinking-water quality report, also called a Consumer Confidence Report. Search the report for “fluoride” and note the reported concentration, units, sampling period and any range shown. A report may describe results for a system or sampling location rather than a measurement from your individual tap.
If the report does not answer your question, contact the utility. Ask whether it adds fluoride, what fluoride level it most recently reported and where you can find the underlying report. A concentration by itself does not distinguish naturally occurring fluoride from added fluoride.
For a private well, or if you want a measurement from your own tap, use a test that specifically measures fluoride or ask a laboratory about fluoride testing. Our guide to how to test water quality at home explains how to approach testing. If you are considering treatment, compare product specifications and certification claims for fluoride reduction; not every pitcher filter is designed to reduce it. See the best pitcher water filters for options to investigate.
What do fluoride levels in mg/L mean?
Fluoride concentrations are commonly reported in milligrams per liter (mg/L). The following numbers serve different purposes; none is a measurement of New Jersey’s statewide water.
| Level | What it represents |
|---|---|
| 0.7 mg/L | US Public Health Service recommended level for community water fluoridation |
| 2.0 mg/L | EPA secondary drinking-water standard |
| 4.0 mg/L | EPA maximum contaminant level for public drinking water |
The recommended level applies to community water fluoridation; it does not establish that every supplier adds fluoride. The secondary standard is a federal guideline, while the maximum contaminant level is an enforceable federal limit for public water systems. Compare a reported result with these figures only after checking that it uses the same units and understanding what and when the utility sampled.
Who should ask about fluoride?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the New Jersey data come from?
The CDC community water fluoridation dataset reports the share of New Jersey’s water-system population receiving fluoridated water through the Water Fluoridation Reporting System. The figure cited here is for 2020; it does not establish the current statewide percentage.
The CDC percentage and a utility’s water-quality report answer different questions. The former describes a statewide population share, while the latter can provide local concentration results. Use the utility’s report or a suitable test for information about your own supply.
Frequently asked questions
Does the statewide percentage cover private wells?
No. The 2020 figure describes people served by community water systems, not people using private wells.
Can the statewide percentage tell me how many utilities add fluoride?
No. It measures the share of the community water system population receiving fluoridated water, not the number or percentage of utilities that add fluoride.