Is There Fluoride in New Hampshire Water?
Partly: 46.2% of people on community water systems in New Hampshire received fluoridated water in 2020. That statewide figure does not establish the fluoride status of a particular address or private well. For comparisons beyond the state, see fluoride in tap water by city.
Naturally occurring fluoride is not the same as fluoride added through fluoridation. Water can contain natural fluoride even if a supplier does not add it, so detecting fluoride does not by itself prove that a supply is artificially fluoridated.
How much of New Hampshire’s water is fluoridated?
In 2020, 46.2% of people served by New Hampshire community water systems received fluoridated water, according to the CDC’s state-level data. The percentage describes people served, not the percentage of water systems or the amount of fluoride measured in a sample.
It is also a snapshot from 2020, rather than a current result for every supply. It does not tell you whether your own utility adds fluoride, whether your water contains naturally occurring fluoride, or what concentration is present at your tap.
People who rely on private wells are not represented as customers of community water systems in that figure. A statewide percentage therefore cannot replace a report or test for the water you actually drink.
What is New Hampshire’s fluoride policy?
The CDC percentage does not establish New Hampshire’s statewide law or policy on fluoridation. It does not show whether fluoridation is required or prohibited statewide, or who makes a decision for a particular water system.
For a current answer about a specific supply, ask the water utility whether it adds fluoride and where its policy can be found. For the statewide legal position, check current New Hampshire law rather than treating the 2020 percentage as a statement of policy.
A utility’s decision to add fluoride and the fluoride concentration in its water are separate pieces of information. Ask for both if you want to understand your supply.
How can you check fluoride in your own water?
Start by identifying the water system that serves your address. A city name alone may not be enough to identify the supplier: service boundaries do not necessarily match municipal boundaries, and some homes use private wells.
If you have a community water supplier, look for its annual drinking water quality report, also called a consumer confidence report. Check for a fluoride entry and note the testing year and how the result is reported—for example, whether it is an individual result, an average, or a range.
If fluoride is not listed, or the report does not make the treatment policy clear, contact the supplier. Ask whether fluoride is added, whether it occurs naturally in the source water, and what the most recent available test result represents. A report for another city or an older year may not describe your current supply.
If you use a private well, a water test can tell you the fluoride concentration in that sample. Use a laboratory that tests for fluoride and follow its sampling instructions; see our guide to testing water quality at home for the steps. A concentration result alone cannot tell you whether fluoride was naturally present or added upstream.
If you are considering filtration, check the product’s certification and its specific fluoride-reduction claim rather than assuming every pitcher reduces fluoride. Our guide to the best pitcher water filters can help you compare options.
What do the fluoride levels mean?
The following numbers are reference points for interpreting a result; they are not measured New Hampshire levels.
| Reference | Fluoride level | What it means |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A nonenforceable secondary drinking water standard |
| EPA maximum contaminant level | 4.0 mg/L | The enforceable federal limit for public drinking water systems |
The recommended level is not the same kind of number as the EPA limit. Compare a result in milligrams per liter, or mg/L, with the appropriate reference, while checking the result’s date and whether it is a single sample, average, or range. The 2020 statewide percentage is not a concentration and cannot be compared with these levels.
Questions about your water
If you have questions about fluoride in your drinking water, ask a dentist or doctor. Bring your utility’s report or well-water test result to the conversation.
Where does the New Hampshire data come from?
The state percentage comes from the CDC’s community water fluoridation state and county data, using its 2020 New Hampshire figure for the population served by fluoridated public water systems. It is a population statistic, not a tap-water test or a current determination for an individual utility.
For an address-specific answer, the most useful next source is the current report or treatment information from the supplier—or a laboratory result if the address uses a private well.
Frequently asked questions
What does mg/L mean on a water report?
It means milligrams per liter, a unit used to report the concentration of a substance in water.
Does a fluoride test show whether fluoride was added?
A concentration result alone does not establish the source. Ask the water supplier about its treatment practices as well.
Is the 46.2% figure a fluoride concentration?
No. It is the share of people on New Hampshire community water systems who received fluoridated water in 2020.