Is There Fluoride in Nevada Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 76.4% of people on community water systems received fluoridated water in 2020. That statewide figure does not establish whether fluoride is added to the water at a particular address; see fluoride in tap water by city for local information.

How much of Nevada’s water is fluoridated?

In 2020, 76.4% of Nevada’s community water system population received fluoridated water, according to the CDC’s water fluoridation reporting data. The percentage describes people served, not the percentage of water sources or utilities that were fluoridated.

It is also a historical figure, not a measurement of current coverage. It does not tell you which system serves your home or give a measured fluoride concentration for your tap.

The percentage does not describe water from private wells, which are outside community water systems. Fluoride can occur naturally in water, but its presence alone does not establish that a utility adds fluoride or operates a fluoridation program.

What is Nevada’s law or policy on fluoridation?

The statewide coverage figure does not establish Nevada’s current law or policy on fluoridation. We found no statewide policy information in the available data that would establish whether a particular utility is required to add fluoride.

A coverage percentage should not be read as a legal requirement: it reports how many people received fluoridated water, not what every utility must do. It also cannot establish whether a local policy has changed since 2020.

For a current answer, ask your water utility or Nevada’s drinking water regulator to identify the rule or policy that applies to your service area. A utility can also explain its own treatment practices.

How can you find out about your city or water utility?

Start by identifying the system that supplies your address. Your water bill may name the utility; if you rent or your water is included in another bill, ask your landlord or property manager. A city name alone may not be enough to identify the system serving a particular home.

Ask the utility for its latest drinking water quality report, sometimes called a consumer confidence report. Look for fluoride in the results and check the sampling year, the reported concentration and whether the report gives a range. A reported concentration tells you how much fluoride was measured, while the utility can explain whether it adds fluoride or whether fluoride is naturally present.

If the report is unclear, ask the utility where the sample was taken and whether the result applies to your service area. Also ask whether the system adds fluoride and, if so, what level it aims for. A report from an earlier year is useful context, but it does not guarantee the concentration at your tap today.

For a private well, or if you want a result for water at your home, ask a qualified laboratory about a fluoride test and its sampling instructions. Our guide to how to test water quality at home explains how to approach testing.

If you are considering a filter, check whether the exact model is certified for fluoride reduction; not every pitcher filter is designed to reduce it. Compare options in our guide to the best pitcher water filters.

What do the fluoride levels mean?

Fluoride concentrations are commonly reported in milligrams per liter, or mg/L. These three federal reference values have different purposes:

LevelWhat it means
0.7 mg/LThe US Public Health Service’s recommended level for community water fluoridation.
2.0 mg/LThe EPA’s secondary drinking water standard, which is not the same as its enforceable primary limit.
4.0 mg/LThe EPA’s maximum contaminant level for fluoride in regulated public drinking water systems.

The 0.7 mg/L recommendation is not a measurement of Nevada water. Likewise, the EPA values are standards for comparison, not Nevada test results. The available statewide coverage figure does not include a measured fluoride level.

When comparing a utility or laboratory result with these values, check the units and the sample date. A concentration alone does not establish whether fluoride was added: fluoride can also be naturally present.

When should you ask a dentist or doctor?

If you have questions about fluoride in your drinking water, ask a dentist or doctor.

Where does the Nevada data come from?

The statewide coverage figure comes from the CDC’s community water fluoridation state and county data, based on its Water Fluoridation Reporting System. The Nevada figure used here is for 2020 and represents the share of the public water system population receiving fluoridated water.

That source is useful for understanding statewide coverage, but the percentage is not a substitute for a current utility report or a test of your own water. Use the sampling year and location on any local result when comparing it with federal reference values.

Frequently asked questions

Can fluoride be present without a utility adding it?

Yes. Fluoride can occur naturally in water, so detecting it does not by itself show that a utility adds fluoride.

Does boiling water remove fluoride?

No. Boiling does not remove fluoride, and evaporation can increase its concentration.