Is There Fluoride in Nebraska Water?

DetoxWater Editorial Team•Published November 5, 2026

Yes, for most residents: 73.8% of people on Nebraska community water systems received fluoridated water in 2020. That statewide figure does not establish the fluoride level at a particular tap; see fluoride in tap water by city for local information.

How much of Nebraska’s water is fluoridated?

In 2020, 73.8% of the population served by Nebraska community water systems received fluoridated water, according to the CDC’s community water fluoridation dataset. The figure is a share of people served, not a percentage of Nebraska towns or water systems.

It also is not a percentage of everyone in Nebraska: people using private wells are not part of the community-water-system population described by that statistic. The figure is from 2020, so it should not be treated as a current measurement of statewide coverage.

Fluoride can occur naturally in water, and some water systems add it. Finding naturally occurring fluoride is not, by itself, evidence that a utility adds fluoride. The statewide percentage does not tell you the concentration in your own water.

What is Nebraska’s law on water fluoridation?

The statewide percentage does not establish what Nebraska law requires. The information cited here does not establish whether Nebraska has a statewide fluoridation requirement or how local fluoridation decisions are made.

Nor can the percentage identify the policy of an individual city or utility. For a local answer, ask the water provider whether it adds fluoride and where its policy can be found. A reported fluoride concentration alone does not establish whether the fluoride was added or occurs naturally.

How can you find out about your city or utility?

Start with your water bill to identify the utility that serves your address. Look for its drinking water quality report, also called a Consumer Confidence Report, and check for a fluoride entry. Note the reporting period as well as the result, since an older report may not describe your current supply.

If fluoride is listed, check the units and whether the result is an average, a range or another reported value. A utility-wide result describes what the report measured over its stated period; it is not necessarily a measurement taken at your tap today. If fluoride is not listed, ask the utility whether it tested for fluoride and what the result was.

You can also ask the utility whether it adds fluoride, whether fluoride occurs naturally in its source water and whether different sources serve different areas. Those questions help distinguish a local water-quality result from a decision to fluoridate. They also give you a way to confirm that the report applies to your address.

If you use a private well, the community-system percentage does not tell you what is in your water. A qualified laboratory can test a well-water sample for fluoride and report the result in milligrams per liter (mg/L). Our guide explains how to test water quality at home.

If you are considering a filter, do not assume every pitcher reduces fluoride. Check the specific model’s certification and performance information for fluoride; the best pitcher water filters guide is a place to compare options.

What do the fluoride levels mean?

The figures below are reference values, not measured Nebraska water levels. Compare them with a local result only when that result uses the same units, mg/L.

ReferenceFluoride levelMeaning
US Public Health Service recommendation0.7 mg/LRecommended level for community water fluoridation
EPA secondary standard2.0 mg/LFederally non-enforceable secondary standard
EPA maximum contaminant level4.0 mg/LEnforceable limit for public water systems

The 0.7 mg/L recommendation is not a finding that every fluoridated system measures exactly that level. Likewise, the two EPA standards are different reference points; neither tells you what a particular Nebraska utility measured. Use the utility report or a laboratory result for that local comparison.

When should you ask a professional?

If you have questions about fluoride in your drinking water or what a result means for you, ask a dentist or doctor.

Where does the data come from?

The Nebraska coverage figure comes from the CDC Water Fluoridation Reporting System dataset linked above. Its basis is the population served by community water systems, and its year is 2020. It does not give a current fluoride measurement for your household.

The comparison values come from the US Public Health Service recommendation and EPA drinking water standards. They serve a different purpose from the CDC coverage figure: they are expressed as concentrations in mg/L, while the CDC figure is a percentage of people served.

For an address-specific answer, use the statewide figure as background and obtain a local utility report or a water test. Keep the source and reporting year with any result you compare.

Frequently asked questions

Does boiling water remove fluoride?

No. Boiling does not remove fluoride from water.

What does ppm mean on a fluoride report?

Ppm means parts per million. For fluoride in water, 1 ppm is approximately equal to 1 mg/L.