Is There Fluoride in Nashville Water?
Yes, Nashville’s utility adds fluoride, with a state-reported operational mean of about 0.66 mg/L in 2025.
Is fluoride added to Nashville water?
The CDC’s 2025 fluoridation status report lists Metro Nashville Water Dept. as fluoridated, with the status “Adjusted.” That classification means the utility adds fluoride; it is not a report of naturally occurring fluoride alone.
The listing identifies the system as Metro Nashville Water Dept., TN0000494. If another utility supplies your address, check that system’s report rather than assuming Nashville’s figures apply. You can also compare fluoride in tap water by city.
How much fluoride is in Nashville water?
The CDC’s monthly fluoride-level report contains state-reported operational values for Metro Nashville Water Dept. The 2025 mean below is calculated from 24 monthly values across two reporting rows; it is not a measurement from every home.
| Measure or benchmark | Fluoride level | Basis |
|---|---|---|
| Nashville mean | 0.66 mg/L | Mean of 24 state-reported monthly operational values in 2025 |
| Nashville monthly range | 0.60–0.72 mg/L | Lowest and highest state-reported monthly operational values in 2025 |
| US Public Health Service recommended level | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable federal secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable federal drinking-water limit |
Nashville’s 2025 operational mean was slightly below the recommended level and below both EPA benchmarks. The highest reported monthly value in 2025 was slightly above the recommended level, which is a target rather than a maximum. The operational mean alone is not a determination of regulatory compliance.
What are the Davidson County and Tennessee figures?
In 2020, CDC state and county data reported that 100.0% of Davidson County’s public-water-system population received fluoridated water. The corresponding figure for Tennessee was 88.8%.
These percentages describe populations served by public water systems, not necessarily every county or state resident. They also describe 2020, while the Metro Nashville Water Dept. status and operational values above are from 2025. The county percentage is context; it is not a separate measurement of Nashville’s utility water.
What does Tennessee law say about fluoridation?
The reporting cited here does not establish Tennessee’s state law or policy on community water fluoridation. Nashville’s “Adjusted” classification describes the utility’s reported status; it does not, by itself, establish whether a state requirement or a local decision led to fluoride being added.
For a question about a current requirement or local policy, ask the utility or the relevant Tennessee drinking-water agency. Keep that policy question separate from the reported fluoride level: a rule about fluoridation and a measurement of water are different kinds of information.
How can you check your water or remove fluoride?
First, identify the water system serving your address from your bill or by contacting your utility. Ask for its latest water-quality report and fluoride results. If your water comes from a private well, the Metro Nashville Water Dept. figures do not describe your well water.
For a result specific to your tap, use a laboratory that tests drinking water for fluoride and follow its sampling instructions. Our guide to how to test water quality at home explains how to approach testing. A current tap result can differ from the utility’s reported 2025 operational mean.
If you want to reduce fluoride, choose a treatment system independently certified for fluoride reduction. For example, a reverse-osmosis unit may be certified under NSF/ANSI 58, but check that fluoride reduction is listed for the specific model. A carbon filter or pitcher is not automatically a fluoride-removal filter; check the certification and maintenance instructions before buying. See our guide to the best pitcher water filters, and verify each model’s fluoride claim separately.
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the data come from?
The status and operational figures come from CDC’s My Water’s Fluoride reports for Tennessee in 2025. The level is a mean of reported monthly values across two rows, so it should not be mistaken for a single sample or a guarantee of the level at an individual tap.
The county and state percentages come from CDC’s community water fluoridation dataset for 2020. The three comparison levels are federal recommendations or standards; they serve different purposes and should not be treated as interchangeable.
Frequently asked questions
What does mg/L mean on a fluoride report?
It means milligrams of fluoride per liter of water, a measure of concentration.
Can fluoride occur naturally as well as be added?
Yes. Fluoride can occur naturally in source water. Nashville’s adjusted status indicates that fluoride is added, but the reported 2025 level does not identify how much was naturally occurring.