Is There Fluoride in Naperville Water?
Yes, Naperville’s utility adds fluoride, but its fluoride level is not reported in the available data. For comparisons with other communities, see fluoride in tap water by city.
Is Naperville water fluoridated?
Naperville is listed as fluoridated in the CDC’s 2025 Fluoridation Status Report. The listing identifies the public water system as NAPERVILLE, with system ID IL0434670.
That status means the utility adds fluoride. It is different from a water source containing fluoride naturally, which on its own does not establish that a utility fluoridates its water. The status listing does not give a measured fluoride concentration for Naperville.
How much fluoride is in Naperville water?
A measured fluoride level for Naperville is not reported in the available data, so there is no local concentration or sampling year to compare with the following benchmarks. All three figures are expressed in milligrams per liter of water (mg/L).
| Benchmark | Level | What it represents |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | A non-enforceable secondary drinking-water standard |
| EPA maximum contaminant level | 4.0 mg/L | An enforceable limit for public drinking-water systems |
The 0.7 mg/L recommendation is not a reported measurement from Naperville. Without a local test result, the status listing alone cannot show how Naperville’s concentration compares with any of these benchmarks.
How does Naperville compare with DuPage County and Illinois?
In 2020, 98.0% of the DuPage County population served by public water systems received fluoridated water, according to CDC data. The corresponding Illinois figure was 98.4% of the state population served by public water systems.
These percentages describe populations served, not the percentage of water systems or the fluoride concentration in an individual home. The county figure is context for Naperville, not a measurement from Naperville’s utility. The county and state figures are also from 2020, while Naperville’s listed fluoridation status is from 2025.
What does Illinois law say about water fluoridation?
The available records do not specify Illinois’s current fluoridation law or policy. Naperville’s CDC status and the county and state percentages do not establish what state law requires, which systems it covers, or whether any exceptions apply.
For an answer about current requirements, ask the relevant Illinois public health or environmental agency. Keep that policy question separate from the practical question of what Naperville’s utility currently adds and what a water sample measures.
How can you check your water or remove fluoride?
Start with the source of the water you want to check. Naperville’s public-system status does not establish the fluoride level in a private well or in water after it has passed through a household filter.
- Ask the utility for its latest water-quality report. Look for fluoride results, the sampling period and whether a number is an average, a range or a single result.
- Check the units. Compare a result reported in mg/L with the benchmarks above, and note the year and sampling location before drawing conclusions.
- Consider a laboratory test. Ask a state-certified drinking-water laboratory for a fluoride test and follow its bottle, sampling and shipping instructions.
- Choose the sampling point. A sample from an unfiltered tap answers a different question from one collected after a household filter. If you want to assess a filter, ask the laboratory how to sample before and after it.
Our guide to how to test water quality at home explains ways to check household water. A home test or lab result describes the sample collected; it should not be treated as a measurement of every tap or every day.
If you want to reduce fluoride, look for a treatment product independently certified for fluoride reduction. Reverse-osmosis systems, distillation units and certain other filters can reduce fluoride, but performance depends on the specific product. Follow its installation and replacement instructions, and consider testing treated water if you need to know the result at your tap.
Do not assume that every pitcher removes fluoride. When comparing the best pitcher water filters, check the specific model’s certification or performance information for a fluoride-reduction claim.
When should you ask a professional?
If you have questions or concerns about fluoride in your drinking water, ask a dentist or doctor.
Where does the Naperville data come from?
The CDC My Water’s Fluoride status report lists NAPERVILLE, system ID IL0434670, as fluoridated in 2025. It supports the added-fluoride status, not a numerical concentration in this comparison.
The CDC state and county fluoridation dataset supplies the 2020 population percentages for DuPage County and Illinois. To check a more recent concentration for your address, request the latest utility report or arrange a sample test.
Frequently asked questions
Does boiling Naperville water remove fluoride?
No. Boiling does not remove fluoride and can increase its concentration as water evaporates.
What does mg/L mean on a fluoride test?
It means milligrams of fluoride per liter of water. In water, 1 mg/L is approximately equal to 1 part per million.
Does a refrigerator filter remove fluoride?
Not necessarily. Check the specific refrigerator filter’s independent certification or performance information for a fluoride-reduction claim.