Is There Fluoride in Murfreesboro Water?
Yes, the Murfreesboro Water Department adds fluoride; its state-reported operational average was about 0.66 mg/L across monthly values in 2025.
The utility’s status is adjusted, meaning fluoride is added rather than the reported status being based solely on naturally occurring fluoride. For comparisons with other locations, see fluoride in tap water by city.
Does Murfreesboro add fluoride to its water?
Yes. The CDC’s 2025 fluoridation status report lists the Murfreesboro Water Department, system TN0000491, as fluoridated with an adjusted status.
Fluoride can occur naturally in water, but natural fluoride alone is not the same as adding fluoride through community water fluoridation. Murfreesboro’s adjusted status identifies the utility’s reported practice of adding it.
This status applies to the named public water system. If your address is in or near Murfreesboro, check your water bill or ask your supplier to confirm which system serves you; a city name in a mailing address does not by itself establish the supplier.
How much fluoride is in Murfreesboro water?
The CDC’s 2025 monthly fluoride report contains state-reported operational values for the Murfreesboro Water Department. The annual figure below is the mean of the 12 reported monthly values, not a separate measurement at every tap.
| Measure or standard | Fluoride level | Basis |
|---|---|---|
| Murfreesboro average | 0.66 mg/L | Mean of 12 state-reported monthly operational values, 2025 |
| Murfreesboro lowest reported month | 0.59 mg/L | Lowest monthly operational value, 2025 |
| Murfreesboro highest reported month | 0.71 mg/L | Highest monthly operational value, 2025 |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary drinking water standard |
| EPA primary limit | 4.0 mg/L | Enforceable maximum contaminant level |
The 2025 annual average was below the recommended level and both EPA standards. The highest reported monthly value was slightly above the recommendation but below both EPA standards. The recommendation is not the same kind of benchmark as the enforceable EPA limit.
The monthly figures describe reported utility operations, not necessarily the concentration at a particular home on a particular day. They also should not be used alone to determine a utility’s regulatory compliance.
How do Rutherford County and Tennessee compare?
The CDC’s state and county fluoridation data reports that 100.0% of Rutherford County’s public water system population received fluoridated water in 2020. The corresponding figure for Tennessee was 88.8% of its public water system population in 2020.
These are population-coverage figures, not fluoride concentrations. They describe people served by public water systems, rather than every resident or every private well. They also provide historical county and state context; they do not replace the Murfreesboro Water Department’s own status and level reports.
What does Tennessee law say about fluoridation?
The cited CDC reports describe fluoridation status and coverage, but they do not establish whether Tennessee law requires, permits or otherwise regulates the practice. A current statewide legal requirement cannot be determined from these reports.
Murfreesboro’s adjusted status tells you what the named utility reported doing. It does not, on its own, show that state law requires every water system to do the same.
How can you check your water or remove fluoride?
Start by identifying your water supplier on your bill, then ask it for its latest water-quality report and the fluoride results for your system. Ask which year the results cover and whether they represent routine system monitoring or a sample from your address.
For a result specific to your home, ask a laboratory that tests drinking water for a fluoride test. Follow its sampling instructions and request the result in milligrams per liter. If you use a private well, a test of that water is more informative than the Murfreesboro utility’s system average. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, look for a treatment product independently certified with a specific fluoride-reduction claim. Reverse osmosis systems and some filters can reduce fluoride, but not every filter or pitcher is designed to do so. Check the claim for the exact model, follow its maintenance schedule, and consider testing the treated water; our guide to the best pitcher water filters can help you compare options.
When should you ask a professional?
If you have questions about fluoride in your drinking water or want personal guidance, ask a dentist or doctor.
Where does the data come from?
The city-specific status and monthly values come from two CDC My Water’s Fluoride reports for 2025. The status report identifies the Murfreesboro Water Department as adjusted; the monthly report supplies the operational values used for the average and range above.
The county and Tennessee percentages come from a separate CDC dataset for 2020. Because the datasets cover different years and measures, the coverage percentages should not be read as measurements of fluoride at a Murfreesboro tap. For the most recent local information, contact your water supplier.
Frequently asked questions
Does boiling Murfreesboro water remove fluoride?
No. Boiling is not a reliable way to remove fluoride; as water evaporates, the fluoride left in it can become more concentrated.
Is mg/L the same as parts per million for fluoride in water?
For a dilute substance in water, 1 mg/L is approximately equal to 1 part per million.