Is There Fluoride in Montgomery Water?
Yes, Montgomery Water Works adds fluoride, and its reported average level was about 0.72 mg/L in 2025.
That answer applies to Montgomery Water Works in Montgomery, Alabama; it does not establish the fluoride status of every water supply in the surrounding area. For other locations, see fluoride in tap water by city.
Does Montgomery water contain added fluoride?
Montgomery Water Works is listed as fluoridated, with a status of adjusted, in the CDC’s 2025 fluoridation status report. The listing identifies the utility as MONTGOMERY WATER WORKS, system AL0001070.
“Adjusted” means the utility adds fluoride; the finding is not simply that naturally occurring fluoride was detected. The report describes the utility’s status for 2025, so contact the utility if you need to confirm its current practice or whether it serves your address.
How much fluoride is in Montgomery water?
The reported 2025 operational fluoride level was 0.72 mg/L, calculated as the mean of 32 monthly values across six reported rows. The lowest and highest of those reported monthly values were 0.53 mg/L and 0.81 mg/L, respectively, in 2025. These figures come from the CDC’s monthly fluoride levels report.
| Measurement or reference | Fluoride level | Basis |
|---|---|---|
| Montgomery Water Works mean | 0.72 mg/L | 2025 mean of 32 reported monthly operational values across six rows |
| Lowest reported monthly value | 0.53 mg/L | 2025 reported monthly values |
| Highest reported monthly value | 0.81 mg/L | 2025 reported monthly values |
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation |
| EPA secondary standard | 2.0 mg/L | Non-enforceable secondary standard |
| EPA maximum contaminant level | 4.0 mg/L | Enforceable drinking-water limit |
The 2025 mean was slightly above the 0.7 mg/L recommendation and below both EPA standards. The mean summarizes reported operational values; it is not a measurement from every household tap or a guarantee of the level at a particular time.
How does Montgomery compare with the county and Alabama?
In 2020, 97.6% of the public-water-system population in Montgomery County received fluoridated water, compared with 77.7% statewide in Alabama. Both figures are from the CDC’s state and county fluoridation dataset.
These percentages describe populations served by public water systems, not the fluoride concentration at a tap. They also cover a different year from Montgomery Water Works’ 2025 operational data. The county figure is context for the area; it is not a separate measurement of the city utility.
What are Alabama’s fluoride law and policy?
The available information does not establish whether Alabama law requires, permits or restricts community water fluoridation. The CDC records identify Montgomery Water Works’ reported status and levels, but they do not establish the legal authority for the utility’s practice.
For a current answer about state requirements or local decisions, ask the relevant Alabama state authorities or Montgomery Water Works. A utility’s reported fluoridation status should not be treated as a statement of what state law requires of every water system.
How can you check your water or remove fluoride?
First, confirm which water system serves your address. A water bill or the utility can help identify your supplier; an address in the Montgomery area does not by itself establish that Montgomery Water Works supplies your tap.
Ask your supplier for its latest drinking-water quality report and its current fluoride information. For a measurement at your own tap, use a laboratory that tests drinking water for fluoride and follow its sample-collection instructions. Our guide to how to test water quality at home explains the testing process.
If you want to reduce fluoride, consider a reverse-osmosis system or a filter specifically certified for fluoride reduction. Check the certification and the product’s fluoride-reduction claim: not every pitcher or carbon filter is designed to remove it. Compare options in our guide to the best pitcher water filters, and follow the manufacturer’s replacement schedule.
Who can answer personal questions?
If you have questions about fluoride in your drinking water, ask a dentist or doctor.
Where does the data come from?
The utility status and operational measurements come from CDC My Water’s Fluoride reports for Alabama in 2025. The reported 0.72 mg/L is a mean of monthly values, while the 0.53–0.81 mg/L range describes the lowest and highest reported monthly values in that set.
The county and state percentages come from a separate CDC dataset for 2020. Check the report year and the system name when using either source: a population percentage, an operational average and a home tap test answer different questions.
Frequently asked questions
Does boiling Montgomery water remove fluoride?
No. Boiling does not remove fluoride and can concentrate it as water evaporates.
Is 0.72 mg/L the same as 0.72 parts per million?
For a dilute water solution, 0.72 mg/L is approximately 0.72 parts per million.