Is There Fluoride in Montana Water?
Partly: 31.4% of people on community water systems in Montana received fluoridated water in 2020. That figure does not establish the fluoride level in every Montana water supply. For comparisons with individual places, see fluoride in tap water by city. Fluoride can occur naturally in water; natural fluoride is not the same as fluoridation, which involves adjusting a water supply’s fluoride level.
How much of Montana’s water is fluoridated?
The 2020 CDC Water Fluoridation Reporting System dataset reports that 31.4% of Montana’s community water system population received fluoridated water. That is a measure of people served, not the percentage of water systems that fluoridate or the percentage of all Montana residents.
The figure does not tell you the fluoride concentration at a particular tap or identify whether fluoride there is natural or added. It also does not describe private wells. A statewide percentage is useful context, but it cannot substitute for a local measurement.
What is Montana’s fluoridation law or policy?
The CDC figure does not establish what Montana law requires, whether a particular utility adds fluoride, or which authority made a local decision. It should not be read as evidence of either a statewide mandate or a statewide prohibition.
For a current answer about state requirements, ask Montana’s drinking water program or your water provider. For a local decision, ask the utility directly. The statewide percentage alone cannot tell you what rule applies to your water system.
How can you find out about your city or utility?
Start by identifying the water system that serves your address. A water bill may name the utility; if you rent or receive water through a shared system, your landlord or property manager may be able to identify it.
Look for the utility’s drinking water quality report and check whether it lists fluoride. If it does, note the concentration in milligrams per liter (mg/L), the sampling year and what the result represents. A report may describe a range of samples rather than a measurement from your own tap. If fluoride is not listed or the report is unclear, ask the utility for its latest fluoride result and whether fluoride is added.
You can also ask where the sample was collected and whether the result describes treated water or the source water. These details help you understand what the number represents. A measurement from one location or date should not be assumed to describe every tap at every time.
If you use a private well, a utility’s report may not describe your water. Ask a laboratory about a fluoride test, including its instructions for the sample container, collection and delivery. Keep the sampling date and location with the result, especially if you test both untreated well water and water from a treated tap. Our guide to how to test water quality at home explains how to approach testing.
If you are considering filtration, check whether a product is certified for fluoride reduction; not every pitcher filter is designed to reduce it. See the guide to the best pitcher water filters and verify the specifications of any individual product.
What do the fluoride levels mean?
These figures are reference points, not measured levels for Montana or for a particular utility:
| Reference | Fluoride level | What it means |
|---|---|---|
| US Public Health Service recommendation | 0.7 mg/L | Recommended level for community water fluoridation; not a federal maximum limit. |
| EPA secondary standard | 2.0 mg/L | A secondary guideline that is not federally enforceable. |
| EPA maximum contaminant level | 4.0 mg/L | The federal enforceable limit for public drinking water. |
When reading a water report, compare the reported fluoride concentration with the reference expressed in the same unit. The reference numbers do not show whether fluoride was added or what concentration is present at your address; you need information from the water system or a relevant test for that.
Where does the Montana data come from?
The statewide percentage comes from the CDC Water Fluoridation Reporting System dataset on data.cdc.gov. Its Montana figure is for 2020 and describes the population receiving fluoridated water through community water systems, not a current sample from every household.
No measured fluoride concentration, sampling year or sampling basis for Montana as a whole is identified in that statewide figure. For local detail, use your provider’s water report or ask for its latest result. For a private well or a particular household tap, an appropriate sample can answer a different, more specific question than the statewide percentage.
Who should you ask about fluoride?
If you have questions about fluoride in your water, ask a dentist or doctor.
Frequently asked questions
Does Montana’s 2020 percentage include everyone in the state?
No. The percentage describes people served by community water systems, not all Montana residents.
Can you tell whether water contains fluoride by looking at it?
No. Check a relevant water report or fluoride test rather than relying on the water’s appearance.
Can a pitcher filter remove fluoride?
Some may reduce fluoride, but not all do. Check the individual product’s fluoride-reduction certification and specifications.